Unit of competency Outline

Date retreived
23/07/2026 4:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Implement a paving project

Implement a paving project

Unit of competency
National Code
AHCLSC306
State Code
BAS26
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040399 - Building, N.e.c.
Original Release Date
12/01/2017
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to install and construct a paved surface to a prepared base within a documented scope of works incorporated in a project across a range of situations and environments.This unit applies to individuals who take responsibility for their own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for paving project
  • 1.1 Clarify the requirements of the paving project
  • 1.2 Select and use tools, equipment and machinery and check for serviceability
  • 1.3 Identify workplace health and safety hazards, assess risks and implement controls
  • 1.4 Identify and ameliorate environmental impacts of proposed works
  • 1.5 Select, use and maintain personal protective equipment (PPE)
  • 1.6 Organise delivery of materials to site according to workplace priorities
2. Set out and prepare the site
  • 2.1 Erect site bunting, control pedestrian access and place safety signage
  • 2.2 Locate services
  • 2.3 Make provision for irrigation lines to cross paved areas
  • 2.4 Mark out the paving pattern according to plans and specifications
  • 2.5 Place and compact sub-base material to the required finished levels
  • 2.6 Incorporate surface drainage as specified
3. Implement paving project
  • 3.1 Construct paving
  • 3.2 Install appropriate drainage
  • 3.3 Use tools, equipment and machinery safety in accordance with enterprise safe operating procedures and work health and safety requirements
4. Check quality of work and clean-up site
  • 4.1 Inspect the quality of finished works to ensure they have met the required drawings and specifications standards
  • 4.2 Clean work-site and dispose of debris in an environmentally safe and sensitive manner
  • 4.3 Clean, maintain and store tools and equipment
No information
No information
Replaces
State Code National Code Title Type
D6920 AHCLSC306A Implement a paving project Unit of competency
Replaced By
State Code National Code Title Type
ODU58 AHCLSC316 Implement a paving project Unit of competency