Unit of competency Outline

Date retreived
22/07/2026 6:24 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Provide engineering solutions for uses of materials and thermodynamic effects

Provide engineering solutions for uses of materials and thermodynamic effects

Unit of competency
National Code
UEECD0037
State Code
OCC36
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
12/07/2021
Nominal Hours
72
Description
This unit involves the skills and knowledge required to provide engineering solutions for uses of materials and thermodynamic effects.It includes selecting and using appropriate materials and dealing with thermodynamic effects relative to an engineering problem. It also includes using measuring instruments, applying appropriate theorems, and providing solutions derived from measurements and calculations and justification for engineering solutions.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select materials, tools and equipment to deal with thermodynamic effects
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control work preparation measures and workplace procedures are followed
  • 1.3 Scope of engineering problems are identified from workplace documentation and/or work supervisor
  • 1.4 Advice is sought from the work supervisor to ensure the engineering work is coordinated with others
  • 1.5 Equipment, material and products required for engineering work are obtained in accordance with workplace procedures
  • 1.6 Tools and testing devices required for work are obtained and checked for correct operation and safety
2 Provide engineering solutions to deal with thermodynamic effects
  • 2.1 WHS/OHS risk control work measures and workplace procedures are followed
  • 2.2 The need to inspect and test active systems is determined in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Systems are checked and isolated, as required, in accordance with WHS/OHS requirements and workplace procedures
  • 2.4 Methods used to solve system problems are used from measured and calculated values as they apply to materials and thermodynamics
  • 2.5 Unplanned situations are dealt with in accordance with WHS/OHS requirements and approval of relevant person/s
  • 2.6 Engineering problems are solved without damage to apparatus, circuits, the surrounding environment and/or services using sustainable energy practices with minimum of waste
3 Complete work and document engineering solution/s
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.3 Justification for solutions used to solve system problems is documented
  • 3.4 Work completion is documented and relevant person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC447 UEENEEE160A Provide engineering solutions for uses of materials and thermodynamic effects Unit of competency