Unit of competency Outline
Information current as of
23/10/2026 11:49 PM AWST
23/10/2026 11:49 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce corrective orthoses
Produce corrective orthoses
Unit of competency
National Code
LMTMF6007A
LMTMF6007A
State Code
W7406
W7406
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Original Release Date
16/07/2011
Nominal Hours
50
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Description
Unit descriptor
This unit covers the skills and knowledge required for the production and fitting of corrective orthoses.
This unit covers the skills and knowledge required for the production and fitting of corrective orthoses.
General notes
N/A
Elements and Performance Criteria
1 Select corrective orthoses materials
- 1.1 Materials are selected that reflect client condition requirements and requirements for durability and performance1.2 Other health professionals are consulted if necessary, to clarify or provide additional information
2 Make initial 3D design on cast
- 2.1 Design is consistent with material characteristics2.2 Design is consistent with client anatomical features and condition needs
3 Produce technical drawing of corrective orthoses
- 3.1 Drawing correctly specifies materials to be used in corrective orthoses construction3.2 Drawing correctly specifies anatomical matching, key references and specific performance requirements of corrective orthoses3.3 Dimensions and tolerances are correctly specified, including appropriate use of drawing symbols
4 Review the cast
- 4.1 Cast is reviewed for accuracy, material selection, three-dimensional design and consistency with technical drawing and prescription if present4.2 Changes and refinements are made as necessary, including balancing aesthetic needs with condition and footwear requirements
5 Make diagnostic fitting if appropriate
- 5.1 Mock orthoses are made to specified dimensions and allowance made for final materials if necessary5.2 Diagnostic fitting is made and results interpreted for possible changes to corrective orthoses design and materials
6 Produce and post basic form
- 6.1 Basic form is produced to fitting accuracy 6.2 Basic form reflects features that need to be checked for modification or refinement6.3 Basic form is corrected and posted to corrective orthoses standard
7 Produce trial fitting corrective orthoses and conduct trial fitting
- 7.1 Trial fitting corrective orthoses are produced7.2 Trial fitting corrective orthoses simulate key characteristics of corrective orthoses, including desired corrective action and dimensions7.3 Diagnostic fitting is made and results interpreted for possible changes to corrective orthoses design and materials7.4 Existing shoes, if provided, are modified for trial corrective orthoses
8 Produce corrective orthoses
- 8.1 Corrective orthoses are produced, taking into account original assessment of client needs and results of trial fitting, in accordance with OHS practices8.2 Allowance is made for any variation between trial orthoses and final corrective orthoses for example temporary posting8.3 Dimension and shape of corrective orthoses are checked against specifications in technical drawing8.4 Lining closures and additional padding are fitted as required8.5 Existing shoes, if provided, are checked against corrective orthoses and modified if necessary8.6 Corrective orthoses are finished off to established quality standards
9 Deliver and fit corrective orthoses
- 9.1 A check is made of fitting and adjustments made if necessary9.2 Client is informed of function, management and maintenance procedures for corrective orthoses9.3 Arrangements for follow-up are explained to client9.4 Other health professionals are informed of supply of corrective orthoses where appropriate9.5 Supply of corrective orthoses is noted in client records
10 Follow up client
- 10.1 Client is followed up according to schedule set at time of corrective orthoses supply and appointments made if necessary10.2 Function and state of corrective orthoses are checked10.3 Client condition is assessed and further medical grade footwear treatment or other health professional treatment arranged if necessary
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Corrective orthoses may include:
removable inserts
incorporated ankle or foot orthoses
shoes
post-operative
therapy footwear
Materials may include:
rubber
ethyl vinyl acetate (EVA) and PVC adhesive foams
PVC resins
plastics
vacuum moulding and laminating carbon glass
kevlar fibre
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Corrective orthoses may include:
removable inserts
incorporated ankle or foot orthoses
shoes
post-operative
therapy footwear
Materials may include:
rubber
ethyl vinyl acetate (EVA) and PVC adhesive foams
PVC resins
plastics
vacuum moulding and laminating carbon glass
kevlar fibre
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
obtain and clarify instructions and requirements
identify special construction details and constraints
take accurate measurements
consider factors such as biomechanical requirements, volume expansion, functional and positioning requirements and consequences of corrective orthoses
translate information into working patterns
select appropriate materials
check cast
produce and fit corrective orthoses, including ankle or foot orthoses (AFO)
identify and confirm timelines and costs
communicate effectively with design team, customers, etc.
apply OHS policies in work operations
maintain accurate records
apply administrative functions related to the construction of custom-made medical grade footwear
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
obtain and clarify instructions and requirements
identify special construction details and constraints
take accurate measurements
consider factors such as biomechanical requirements, volume expansion, functional and positioning requirements and consequences of corrective orthoses
translate information into working patterns
select appropriate materials
check cast
produce and fit corrective orthoses, including ankle or foot orthoses (AFO)
identify and confirm timelines and costs
communicate effectively with design team, customers, etc.
apply OHS policies in work operations
maintain accurate records
apply administrative functions related to the construction of custom-made medical grade footwear
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AYP86 | LMTPDMF11A | Produce corrective orthoses | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBA05 | MSTMF4011 | Produce corrective orthoses | Unit of competency |
