Unit of competency Outline
Date retreived
22/07/2026 3:00 PM AWST
22/07/2026 3:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct generator electrical maintenance
Conduct generator electrical maintenance
Unit of competency
National Code
UTPNEG137A
UTPNEG137A
State Code
S3762
S3762
TGA Status
Replaced
Replaced
DTWD Status
Archived
Archived
State Implementation and Classification
Approved Date
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
Nominal Hours
60
Description
Notes
Elements and Performance Criteria
No information
Stream: Production Plant
Field: Maintenance
Equivalencies: This unit of competence incorporates unit 18.55a of the National Metal
and Engineering Competency Standards
Details of maintenance may be clarified by diagnosis and/or workplace inspection
Maintenance may include brush gear inspection, condition monitoring, cleaning, slot wedging, re-insulation, end bell removal, de-gauzing and coolers
Work completion details may include plant and maintenance records, job cards, check sheets and on device labelling updates
Work site environment may be affected by nearby plant or processes, e.g. heat, noise, dust, oil, water and chemicalcan refer to electrical/mechanical or other associated processes
Field: Maintenance
Equivalencies: This unit of competence incorporates unit 18.55a of the National Metal
and Engineering Competency Standards
Details of maintenance may be clarified by diagnosis and/or workplace inspection
Maintenance may include brush gear inspection, condition monitoring, cleaning, slot wedging, re-insulation, end bell removal, de-gauzing and coolers
Work completion details may include plant and maintenance records, job cards, check sheets and on device labelling updates
Work site environment may be affected by nearby plant or processes, e.g. heat, noise, dust, oil, water and chemicalcan refer to electrical/mechanical or other associated processes
Critical aspects of evidence
The knowledge and application of relevant sections of: Occupational, health and safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures
Preparation and planning of work
Maintenance techniques and procedures
Completion of work procedures
Context of assessment
Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions
Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application ofwork
Interdependent assessment of unit
Nil
Knowledge and Skills
A knowledge of:
Occupational health and safety standards; Relevant statutory requirements and codes of practice; Relevant Australian standards; Equipment and material required to perform the work; Isolation procedures; Layout of plant/work site and operation of its equipment; Maintenance techniques ; Electrical equipment; Regulatoryprocedures; Test and measurement instruments; Engineering and workshop practice; Communication principles ; Teamwork
The ability to:
Apply occupational health and safety standards; Follow relevant statutory regulations and codes of practice; Apply relevant Australian standards; Use plans, drawings and text; Use tools and relevant equipment; Use test and measurement instruments; Use maintenance procedures; Select materials for the job; Apply regulatory procedures; Apply data analysistechniques and tools; Communicate effectively ; Work as part of a team.
The knowledge and application of relevant sections of: Occupational, health and safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures
Preparation and planning of work
Maintenance techniques and procedures
Completion of work procedures
Context of assessment
Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions
Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application ofwork
Interdependent assessment of unit
Nil
Knowledge and Skills
A knowledge of:
Occupational health and safety standards; Relevant statutory requirements and codes of practice; Relevant Australian standards; Equipment and material required to perform the work; Isolation procedures; Layout of plant/work site and operation of its equipment; Maintenance techniques ; Electrical equipment; Regulatoryprocedures; Test and measurement instruments; Engineering and workshop practice; Communication principles ; Teamwork
The ability to:
Apply occupational health and safety standards; Follow relevant statutory regulations and codes of practice; Apply relevant Australian standards; Use plans, drawings and text; Use tools and relevant equipment; Use test and measurement instruments; Use maintenance procedures; Select materials for the job; Apply regulatory procedures; Apply data analysistechniques and tools; Communicate effectively ; Work as part of a team.
No information
| State Code | National Code | Title | Type |
|---|---|---|---|
| BBG6 | UTP40198 | Certificate IV in ESI Generation (Electrical/Electronic) | Qualification |
| M084 | UTP30198 | Certificate III in ESI Generation (Electrical/Electronic) | Qualification |