Unit of competency Outline

Date retreived
22/07/2026 6:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair bores and windmills

Service and repair bores and windmills

Unit of competency
National Code
AHCLSK321
State Code
BAM56
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/01/2017
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to service and repair bores and windmills. This includes activities such as replacing parts, checking equipment for wear and tear, determining lime deposits, stripping, dismantling or reassembling bores and windmills.These activities carry risk of falls due to working at heights, injury due to working with moving parts and machinery. All work must be carried out to comply with workplace procedures, work health and safety legislation and codes of practice and manufacturer’s specificationsThis unit applies to individuals who work under broad direction and take responsibility for own work including limited responsibility for the work of others. They use discretion and judgement in the selection and use of available resources and complete routine activities.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Establish bore history and enterprise policy
  • 1.1 Review enterprise records and confirm bore history
  • 1.2 Confirm enterprise bore and windmill service and repair policy with supervisor
  • 1.3 Obtain any required specialist instructions and assistance as appropriate
2. Prepare to carry out service and repairs
  • 2.1 Select and inspect tools, equipment and materials appropriate to job requirements
  • 2.2 Carry out dismantling and stripping of windmill and bore installations appropriately
  • 2.3 Identify hazards in the workplace, assess and control risks appropriately
3. Carry out service and repairs
  • 3.1 Select, use and maintain personal protective equipment appropriately
  • 3.2 Carry out service and repairs to bores, windmills, motors and pumps appropriately
  • 3.3 Report complex faults and repairs and refer for specialist advice and remedial action appropriately
  • 3.4 Retrieve lost equipment appropriately
4. Complete service and repair activities
  • 4.1 Reassemble and test bore and windmill components appropriately for full function and flow
  • 4.2 Clean work site, tools and equipment, return to operating order and store appropriately
  • 4.3 Collect, treat, dispose of or recycle waste from service and repair activities appropriately
  • 4.4 Document information appropriately
No information
No information
Replaces
State Code National Code Title Type
D6966 AHCLSK321A Service and repair bores and windmills Unit of competency
Replaced By
State Code National Code Title Type
OFF39 AHCLSK360 Service and repair bores and windmills Unit of competency