Unit of competency Outline

Date retreived
23/07/2026 8:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Land aeroplane

Land aeroplane

Unit of competency
National Code
AVIY0057
State Code
OBB79
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/08/2019
View on TGA
State Implementation and Classification
Approved Date
17/12/2019
Field of Education
031505 - Aircraft Operation
Original Release Date
17/12/2019
Nominal Hours
40
Description
This unit involves the skills and knowledge required to land an aeroplane in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes conducting aeroplane landings and managing mishandled landings.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Conduct aeroplane landing
  • 1.1 Aeroplane is landed at a controlled rate of descent with alignment above the runway centreline, within a specified area without drift, and directional control is maintained
  • 1.2 Existing wind conditions are confirmed, drift corrections are applied, precise ground track is maintained, and aeroplane is configured for cross-wind landing conditions as required
  • 1.3 Ballooning and bouncing are minimised and controlled in accordance with established aeroplane landing procedures
  • 1.4 Positive directional control is maintained and cross-wind corrections are applied as required during the after-landing roll
  • 1.5 After-landing checks are performed in accordance with approved checklist
  • 1.6 Separation with conflicting air and ground traffic is maintained
  • 1.7 Runway is vacated when practicable
  • 1.8 Aeroplane is stopped safely using drag and/or braking devices within available runway length
  • 1.9 Landing clearance is obtained at applicable airfields
  • 1.10 Wake turbulence is avoided
  • 1.11 Weather conditions are monitored
2 Manage mishandled landing
  • 2.1 Conditional requirements for conducting a missed approach are recognised
  • 2.2 Decision to perform missed approach and subsequent go-around is made when safe landing cannot be achieved
  • 2.3 Power, attitude and configuration are selected to safely control aeroplane
  • 2.4 Aeroplane is manoeuvred clear of the ground and after take-off procedures are conducted
  • 2.5 Allowance for wind velocity is made during go-around
  • 2.6 Wake turbulence is avoided
No information
No information
Replaces
State Code National Code Title Type
AVX61 AVIY4004 Land aeroplane Unit of competency