Unit of competency Outline

Date retreived
22/07/2026 5:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Pitch raise a piano

Pitch raise a piano

Unit of competency
National Code
MSFPT3010
State Code
WI608
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
20
Description
This unit of competency covers pitch raising a piano prior to the tuning process by calculating and assessing the ability of an upright, grand and player piano to achieve the desired pitch, including assessment of overpull or stretch of strings. It applies in workplace and on-site environments for small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan for pitch raising
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices relevant to tuning pianos are verified and complied with
  • 1.2 Customer requirements are received, analysed and confirmed with appropriate personnel
  • 1.3 Communication with others involved with the work is established and maintained to ensure efficient work flow, coordination, personnel cooperation and safety
  • 1.4 Written instructions are followed
2 Prepare to tune unisons
  • 2.1 Tools and equipment are selected consistent with the needs of the job
  • 2.2 Selected tools and equipment are checked for service ability and safety, and any faults repaired and reported according to workplace practices
  • 2.3 Personal protective equipment is correctly fitted and used
3 Assess suitability of piano for pitch raise
  • 3.1 Components used in pitch raising are assessed for suitability
  • 3.2 Distance from target pitch is determined
  • 3.3 Overpull/stretch required to achieve target pitch is calculated
  • 3.4 Pitch standard is established
4 Pitch raise piano
  • 4.1 Correct posture for tuning is used which minimises fatigue and promotes muscular control
  • 4.2 Strings are tuned according to required process
  • 4.3 Pitch raise to achieve an accuracy of ± 5 cent per note
  • 4.4 Correct tuning hammer technique is used
5 Clean up work area
  • 5.1 All tools, materials and other equipment are checked, cleaned and returned to their appropriate location
  • 5.2 Work area is cleared and waste removed
  • 5.3 Workplace documentation is completed and filed
No information
No information
Replaced By
State Code National Code Title Type
OEL52 MSFPT4008 Pitch raise a piano Unit of competency
State Code National Code Title Type
J740 MSF31213 Certificate III in Piano Technology Qualification
AB649 MSFSS00001 Piano Tuning Skill Set Skill set