Unit of competency Outline

Date retreived
23/07/2026 4:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct civil construction water cart operations

Conduct civil construction water cart operations

Unit of competency
National Code
RIIMPO326A
State Code
WB341
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2011
State Implementation and Classification
Approved Date
11/02/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/02/2010
Nominal Hours
32
Description
This unit covers conduct water cart operations in the civil construction industry. It includes: planning and preparing; conducting machine pre-operational checks; operating the water cart; loading, transporting and distributing water; carrying out driver maintenance; and cleaning up.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1. Access, interpret and apply compliance documentation relevant to water cart operations
  • 1.2. Obtain, confirm and apply work instructions to the allotted task
  • 1.3. Obtain, confirm and apply safety requirements to the allotted task
  • 1.4. Obtain, identify and implement signage requirements from the project traffic management plan
  • 1.5. Select plant, tools and equipment to carry out tasks that are consistent with the requirements of the job, check them for serviceability and rectify or report any faults
  • 1.6. Identity, confirm and apply environmental protection requirements from the project environmental management plan, to the allotted task
2. Conduct machine pre-operational checks
  • 2.1. Carry out pre-start, start-up, park and shutdown procedures
  • 2.2. Check water cart controls and functions, including implements or other attachments, brakes and manoeuvrability for serviceability and report or rectify any faults
3. Operate water cart
  • 3.1. Identity site hazards associated with water cart operations and use safe operating techniques to minimise risk
  • 3.2. Manage engine power to ensure efficiency of water cart platform movements and to minimise damage to the engine and gears
  • 3.3. Coordinate engine power with gear selection to ensure smooth transition and operation within torque range
  • 3.4. Operate water cart platform to work instructions
  • 3.5. Constantly monitor road/traffic conditions and ensure no injury to people or damage to property, equipment, loads and facilities
  • 3.6. Bring vehicle to a halt smoothly, minimising the wear and tear on vehicle using the engine retarder, gears and brakes
4. Load, transport and distribute water
  • 4.1. Position water cart at load and discharge/distribution points with a minimum of manoeuvre
  • 4.2. Load water cart to within the authorised carrying capacity and to suit the site and task conditions
  • 4.3. Move water cart from loading to the discharge/ distribution point safely and smoothly avoiding surge and sway
  • 4.4. Discharge or distribute water in accordance with the task specifications
  • 4.5. Monitor and maintain discharge and distribution systems throughout the operations
5. Carry out driver maintenance
  • 5.1. Safely park, shutdown and prepare the water cart for maintenance
  • 5.2. Conduct inspection and fault finding
  • 5.3. Remove and replace defective parts safely and effectively
  • 5.4. Carry out regular programmed maintenance tasks
6. Clean up
  • 6.1. Clear work area and dispose of or recycle materials in accordance with project environmental management plan
  • 6.2. Clean, check, maintain and store vehicle, tools and equipment
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant compliance documentation
may include:
legislative, organisation and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
codes of practice
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Water carts may be:
purpose built vehicles or other vehicle/plant platforms being used for the purpose
Water cart functions are to include:
loading, transporting, discharging and distribution of water
Work instructions may include:
plans, specifications, quality requirements and operational details
quality requirements may include but not be limited to dimensions, tolerances, standards of work and material standards as detailed in the project drawings, specifications and project documentation to meet client satisfaction
Safety requirements are to be:
in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan
Safety requirements may include:
protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances
personal protective equipment is to include that prescribed under legislation, regulation and workplace policies and practices
safe operating procedures which are to include but not be limited to recognising and preventing hazards associated with underground and overhead services, other machines, personnel, restricted access barriers, traffic control, working at heights, working in proximity to others, worksite visitors and the public
safe parking practices which is to include but not be limited to ensuring access ways are clear, equipment/ machinery is away from overhangs and refuelling sites, safe distance from excavations, and secured from unauthorised access or movement
hazards and risks may include but not be limited to uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials
emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping, extinguishing fires, organisational First Aid requirements and evacuation
Tools and equipment are to include:
hand tools and maintenance equipment relevant to the particular water cart
Environmental requirements are to include:
organisational/project environmental management plan, waste management, water quality protection, noise, vibration, dust and clean-up management
Road/traffic conditions include:
road standards, traffic flow, distance and load
Water cart loading tasks are to include:
loading from standpipes and/or purpose built pressure loading points and loading from water sources where water must be pumped from the source
Discharging water means:
the movement of water from the water cart by either pressure pumping or gravity feed through pipes, lines and nozzles and/or spray bars
Discharging tasks are to include:
the spraying of water in civil construction compaction operations by pressure means and by gravity means
Discharging tasks may include:
dust suppression, stabilisation operations, fire fighting support and road maintenance
Distribution of water means:
the movement of water from the water cart into another form of water storage area/receptacle
Distribution tasks are to include:
pressure and gravity discharge into another storage facility which may include the filling of water tanks, water points and/or fire points
Discharge and distribution systems includes:
pumps, lines and nozzles
Communications practices are to include:
verbal instructions and fault reporting and may include 2- way radio, hand signals, mobile phone, site specific instructions, written instructions or instructions related to job/task
on site meeting processes may include notification/ scheduling (time, place, purpose), task discussions and local coordination of procedural and operational issues
Materials may include:
clays, silts, stone, gravel, mud, rock, sand, topsoil, blended materials, organic materials, typical construction site materials/waste and bituminous mixes
rock types may include metamorphic, igneous and sedimentary
Attachments may include:
ripper/tyne, auger, tilt bucket, rock breaker, buckets, lifting device, vibrating compaction plate and compaction wheel
Operator maintenance is to include:
cleaning, authorised servicing and the monitoring, recording and reporting of faults
It may also include
the conduct of authorised minor replacements and the provision of assistance to maintenance personnel during maintenance and repair activities

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for conducting water cart operations
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of water cart operations, including:
over not less than three shifts, and
to include the mandatory tasks stated in the Range Statement and include:
the loading and transporting of water
pressure and gravity discharging of water evenly in civil construction compaction operations in a minimum of two different soil types to meet moisture content requirements
pressure and gravity distribution of water into two separate water storage facilities/receptacles
dust suppression operations
working with others to undertake and complete water cart operations that meet all of the required outcomes
consistent timely completion of water cart operations that safely, effectively and efficiently meet the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes, including:
the loading and transporting of water
pressure and gravity discharging of water evenly in civil construction compaction operations in a minimum of two different soil types to meet moisture content requirements
pressure and gravity distribution of water into two separate water storage facilities/receptacles
dust suppression operations
consistently achieving the required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete water cart operations
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

Replaces
State Code National Code Title Type
W2091 BCCPO3014B Conduct water cart operations Unit of competency
Replaced By
State Code National Code Title Type
WH431 RIIMPO326D Conduct civil construction water cart operations Unit of competency
State Code National Code Title Type
S784 TLI21311 Certificate II in Rail Infrastructure Qualification