Unit of competency Outline
Date retreived
23/07/2026 4:59 AM AWST
23/07/2026 4:59 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Gain entry and reinstate automotive locking systems
Gain entry and reinstate automotive locking systems
Unit of competency
National Code
MEM20010A
MEM20010A
State Code
W5657
W5657
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
11/09/2006
Field of Education
030715 - Precision Metalworking
Original Release Date
11/09/2006
Nominal Hours
36
Description
This unit covers gaining entry to all types of automobiles fitted with mechanical and or electronic locking systems. It also covers straightforward reinstatement of the vehicle locking system by removal and replacement of component parts.
Notes
Elements and Performance Criteria
1. Establish entry requirements to auto locking system
- 1.1. The reason for entry is established.
- 1.2. Authenticity of request is verified in accordance with organisational and industry procedures.
- 1.3. Nature of problem and circumstances of prior operation are established in accordance with organisational procedures, inspection/diagnostic techniques and original specifications.
- 1.4. Vehicle, locking system and other relevant information is identified from appropriate sources and in accordance with organisational and customer requirements.
- 1.5. Specifications for components are obtained from appropriate source and are interpreted correctly.
2. Gain entry to vehicle
- 2.1. Appropriate entry method is selected in accordance with specific circumstances, customer requirements and organisational procedures.
- 2.2. Tools, equipment, materials and consumables are selected appropriate to entry requirements and checked for serviceability in accordance with manufacturers' specifications and organisational procedures.
- 2.3. Selected tools are used correctly to gain entry using appropriate industry practices.
- 2.4. Entry is gained in accordance with applicable legislation, codes, regulations and standards.
3. Re-instate automotive locking components and system
- 3.1. Where applicable, replacement and/or repaired parts are selected for reassembly.
- 3.2. Lock assemblies and components are dismantled/removed using appropriate organisational procedures, industry practices, tools and equipment.
- 3.3. Sub-assemblies are inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.
- 3.4. Appropriate techniques are applied in the preparation, assembly and adjustment of components parts using fastening equipment and methods which ensure conformance to specifications, operational performance, quality and safety of the completed assembly.
- 3.5. Correct lubrication, packing, sealing materials are selected and applied correctly in conformance to job specifications.
- 3.6. Locking system is inspected, tested and adjusted as necessary for compliance to original factory assembly and functioning.
4. Finalise entry and reinstatement process
- 4.1. Documentation is completed and processed in accordance with legislative and organisational requirements.
- 4.2. Work area, tools and equipment are cleaned and stored in accordance with OHS and organisational requirements.
- 4.3. Vehicle is cleaned and returned to serviceable condition.
- 4.4. Customer is advised of work undertaken, further recommended actions and any other relevant information.
- 4.5. Customer is instructed, as necessary, in accordance with organisational procedure and manufacturer recommendations.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Appropriate sources
Catalogues, manufacturer manuals, drawings, detailed/technical sketches and associated data sheets
Organisational requirements
Quality assurance standards and procedures, service standards, safety and OHS practices and obligations, resource storage and use, organisational processes and procedures, documentation processes, product and process training
Customer requirements
Function and capabilities, access issues, service and maintenance requirements, product operation and warranty information, costings
Entry method
Pick, impressioning, reading, manipulate linkages, alternative methods
Tools and equipment
Hand and power tools specific to gaining entry, power tools and accessories, diagnostic specialist equipment, fixing tools, special-purpose equipment, vacuum cleaner
Materials and consumables
Lubricants, adhesives and sealants, cleaning materials, wire and cable
Legislation, codes, regulations and standards
Industry licensing, industry codes of practice, privacy laws, Australian standards, building codes and those of other regulatory bodies, quality assurance, organisational standards and practices, awards and enterprise agreements, competition, trade and consumer protection laws
Documentation
Historical records, procedures and measurements for opening specific vehicles, job sheets, invoices, warranties
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Appropriate sources
Catalogues, manufacturer manuals, drawings, detailed/technical sketches and associated data sheets
Organisational requirements
Quality assurance standards and procedures, service standards, safety and OHS practices and obligations, resource storage and use, organisational processes and procedures, documentation processes, product and process training
Customer requirements
Function and capabilities, access issues, service and maintenance requirements, product operation and warranty information, costings
Entry method
Pick, impressioning, reading, manipulate linkages, alternative methods
Tools and equipment
Hand and power tools specific to gaining entry, power tools and accessories, diagnostic specialist equipment, fixing tools, special-purpose equipment, vacuum cleaner
Materials and consumables
Lubricants, adhesives and sealants, cleaning materials, wire and cable
Legislation, codes, regulations and standards
Industry licensing, industry codes of practice, privacy laws, Australian standards, building codes and those of other regulatory bodies, quality assurance, organisational standards and practices, awards and enterprise agreements, competition, trade and consumer protection laws
Documentation
Historical records, procedures and measurements for opening specific vehicles, job sheets, invoices, warranties
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to gain entry to and reinstating automotive locking systems. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with gaining entry to and reinstating automotive locking systems, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to gain entry to and reinstating automotive locking systems. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with gaining entry to and reinstating automotive locking systems, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAU00 | MEM20010 | Gain entry and reinstate automotive locking systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W243 | MEM30805 | Certificate III in Locksmithing | Qualification |