Unit of competency Outline

Date retreived
22/07/2026 8:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Taxi helicopter

Taxi helicopter

Unit of competency
National Code
AVIY0048
State Code
OBB88
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/08/2019
View on TGA
State Implementation and Classification
Approved Date
17/12/2019
Field of Education
031505 - Aircraft Operation
Original Release Date
17/12/2019
Nominal Hours
15
Description
This unit involves the skills and knowledge required to taxi a helicopter in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes performing air taxiing manoeuvres and air transiting manoeuvres.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Perform air taxiing manoeuvres
  • 1.1 Helicopter is manoeuvred over the ground on a prescribed track at constant height associated with ground effect, and speed is adjusted to suit helicopter type, surface conditions, congestion, maintenance of control and to avoid collision with obstacles or other aircraft
  • 1.2 Awareness of adverse effects of rotor downwash on surrounding aircraft, people, objects and environment is maintained
  • 1.3 Engine and rotor speed (revolutions per minute (RPM)/recommended revolutions per minute ?(RRPM)) are managed within normal operating limits
2 Perform air transiting manoeuvres
  • 2.1 Helicopter is manoeuvred, while allowing for prevailing conditions, over a prescribed track within aerodrome boundaries that is clear of obstacles at a height not above 100 feet (ft) above ground level (AGL) at airspeeds greater than speeds used for air taxiing
  • 2.2 Helicopter performance is considered throughout air transit manoeuvres
  • 2.3 Awareness of adverse effects of rotor downwash on surrounding aircraft, people, objects and environment is maintained
  • 2.4 Instruments, switches or devices are manipulated when safe to do so, including when the release of the collective pitch level is required, while maintaining height, heading, speed, and attitude and not exceeding RPM or power limits
  • 2.5 Air transit ground speed is adjusted to suit helicopter type, traffic conditions, congestion, and maintaining control, and to avoid collision with obstacles or other aircraft
  • 2.6 Lookout is maintained using a systematic scan technique at a rate determined by traffic density, visibility and terrain
  • 2.7 Appropriate risk management is applied during air transit manoeuvres
No information
No information
Replaces
State Code National Code Title Type
AVX70 AVIY0020 Taxi helicopter Unit of competency
Replaced By
State Code National Code Title Type
OEE29 AVIY0084 Conduct helicopter pre-solo exercises Unit of competency