Unit of competency Outline
Date retreived
22/07/2026 5:32 AM AWST
22/07/2026 5:32 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply physics to solving electrotechnology engineering problems
Apply physics to solving electrotechnology engineering problems
Unit of competency
National Code
UEECD0005
UEECD0005
State Code
OCC40
OCC40
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
010301 - Physics
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to apply physics to solving electrotechnology engineering problems.It includes identifying and solving physics-related problems and documenting justifications. It also includes applying knowledge of measurement techniques.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify electrotechnology-related problems
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
- 1.2 WHS/OHS risk control work preparation measures and workplace procedures are followed
- 1.3 Scope of electrotechnology problem is identified from documentation and/or work supervisor
- 1.4 Problems are stated in writing and/or diagrammatic form to ensure appropriate methods are used to resolve them
- 1.5 Equipment and testing devices required for problem solving are obtained and checked for correct operation and safety
2 Apply physics to developing solutions
- 2.1 WHS/OHS risk control work measures and workplace procedures are followed
- 2.2 Tests and measurements are undertaken in accordance with WHS/OHS requirements and workplace procedures
- 2.3 Tests, measurements and results are used to develop resolutions in static and dynamic problems
- 2.4 Theoretical and measured values are applied to develop solutions to static and dynamics problems
- 2.5 Results are applied to develop solutions to problems
- 2.6 Unplanned situations are dealt with in accordance with WHS/OHS requirements and approval of relevant person/s
3 Report solution
- 3.1 Proposed solutions to electrotechnology problems are documented with justification for the solutions
- 3.2 Adverse effects and outcomes of developed solution are reported
- 3.3 Solution report is forwarded to relevant person/s in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7305 | UEENEEE082A | Apply physics to solving electrotechnology engineering problems | Unit of competency |