Unit of competency Outline

Date retreived
23/07/2026 10:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lay segmental paving

Lay segmental paving

Unit of competency
National Code
CPCCPA3002
State Code
OCQ39
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040399 - Building, N.e.c.
Original Release Date
01/06/2021
Nominal Hours
8
Description
This unit specifies the skills and knowledge required to lay segmental pavers on prepared subgrade and base. It applies to people who set out and lay a range of segmental pavers to external areas of new and existing sites.This unit is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work.
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read, interpret and apply laying segmental paving requirements from current plans, specifications, standards and codes.
  • 1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures relevant to work activity.
  • 1.4 Use measurements and apply formulas to calculate material quantities.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others on site.
2 Prepare for work.
  • 2.1 Select and check condition of equipment and tools and report any damage or faults to relevant person.
  • 2.2 Check conformity of materials and pavers for fit for purpose, size, dimension, colour and imperfections.
  • 2.3 Stack rejected pavers aside to use for cuts.
  • 2.4 Stack pavers in preparation for the work.
3 Lay pavers.
  • 3.1 Set out stringline grid squares to establish guide levels and lines.
  • 3.2 Lay pavers to design pattern with localised stresses between adjacent pavers reduced.
  • 3.3 Check, adjust and maintain allowable tolerances during laying of pavers.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 4.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 4.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9437 CPCCPA3002A Lay segmental pavers Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification
BGE7 CPC32320 Certificate III in Stonemasonry Qualification