Unit of competency Outline
Date retreived
22/07/2026 4:27 PM AWST
22/07/2026 4:27 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Move block/bulk glass sheet by mechanical means
Move block/bulk glass sheet by mechanical means
Unit of competency
National Code
LMFGG3003B
LMFGG3003B
State Code
W8677
W8677
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
11/06/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/06/2010
Nominal Hours
16
Description
This unit addresses the knowledge and skills required to move block or bulk flat glass by mechanical means.
Notes
Elements and Performance Criteria
1. Prepare for task
- 1.1. Work requirements in the form of type and quantity of glass to be relocated are identified from work instructions
- 1.2. Workplace health and safety requirements for movement of block glass sheet by mechanical means, including personal protection needs, are observed throughout the work
- 1.3. Blocks of glass sheet to be moved are identified and weight is estimated or calculated
- 1.4. Appropriate mechanical handling equipment is identified
- 1.5. Risks to self, others, material and equipment are identified arising from the required lifting, load carrying, set down or movement of the glass
- 1.6. Equipment and controls including emergency stops and guards are identified and checked for safe operation
- 1.7. Damaged or worn parts are reported to appropriate personnel
- 1.8. Glass is checked for imperfections and damage prior to movement
2. Plan glass movement
- 2.1. Locations for glass storage are identified and routes to be followed determined
- 2.2. Required clearances are compared to available space and adjustments made
- 2.3. Process for relocating glass is planned including predicting and planning for potential difficulties
- 2.4. Proposed process is checked against advisory standards and workplace procedures for compliance
3. Relocate glass
- 3.1. Equipment is operated in accordance with approved advisory standards, manufacturers' instructions, workplace procedures and OH&S requirements
- 3.2. Planned process and route are followed
- 3.3. Glass is relocated without damage to material and equipment or injury
- 3.4. Glass is labelled and stored following workplace procedures ensuring there are no projections
- 3.5. Relocation is checked to see that it meets work requirements, with any differences reported
4. Complete work
- 4.1. Waste and scrap material is removed for disposal or recycling as required
- 4.2. Work area is cleaned and rubbish disposed of as appropriate
- 4.3. Workplace documentation is completed as required
- 4.4. Handling equipment is cleaned, maintained and stored according to workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving the movement of block glass sheet by mechanical means
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the planning and conduct of the operation
Work is generally performed individually, with general supervision and may be part of a production process
Work may be performed in workplaces which are involved in the manufacture, processing and/or installation of sheet glass
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Block/bulk glass may be:
end caps
cased or factory run size (FRS) blocks
Glass may be annealed or laminated
Mechanical handling equipment is to include:
gantry cranes up to 4.9swl
block grabs
slings and chains
Tools and equipment are to include:
glass handling equipment and general hand tools
Materials are to include but are not limited to:
annealed and laminated glass
Personal protective equipment overhead lifting. It may include:
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices for overhead lifting. It may include:
gauntlets
gloves
safety glasses
safety footwear
hard hats
aprons and overalls
Information and procedures
Workplace procedures relating to the handling and movement of glass
Work instructions, including job sheets and plans
Equipment manufacturer instructions
Safety standards including personal protective equipment, OHS regulations and enterprise requirements
Manufacturer instructions for the use of equipment and materials
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving the movement of block glass sheet by mechanical means
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the planning and conduct of the operation
Work is generally performed individually, with general supervision and may be part of a production process
Work may be performed in workplaces which are involved in the manufacture, processing and/or installation of sheet glass
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Block/bulk glass may be:
end caps
cased or factory run size (FRS) blocks
Glass may be annealed or laminated
Mechanical handling equipment is to include:
gantry cranes up to 4.9swl
block grabs
slings and chains
Tools and equipment are to include:
glass handling equipment and general hand tools
Materials are to include but are not limited to:
annealed and laminated glass
Personal protective equipment overhead lifting. It may include:
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices for overhead lifting. It may include:
gauntlets
gloves
safety glasses
safety footwear
hard hats
aprons and overalls
Information and procedures
Workplace procedures relating to the handling and movement of glass
Work instructions, including job sheets and plans
Equipment manufacturer instructions
Safety standards including personal protective equipment, OHS regulations and enterprise requirements
Manufacturer instructions for the use of equipment and materials
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order/job instruction and locate and apply relevant information to plan the relocation of glass using mechanical means
Select and use appropriate equipment and techniques to relocate block glass sheet
Apply safe handling requirements for equipment, products and materials, include use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify personal protective safety apparel and safety regulations for overhead lifting
identify and safely use gantry cranes up to 4.9 swl, including standards and regulations
identify and use block grabs, slings and chains for lifting blocks or end caps of glass sheets
calculate the weight of glass
safely load and secure glass
relocate blocks and end caps of glass sheets by grabs, slings and chains up to 2 t
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Mechanical glass handling equipment, glass sheet to be relocated, workplace operating procedures and personal protection equipment and an appropriate work area.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant mechanical equipment, block glass sheet, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order/job instruction and locate and apply relevant information to plan the relocation of glass using mechanical means
Select and use appropriate equipment and techniques to relocate block glass sheet
Apply safe handling requirements for equipment, products and materials, include use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify personal protective safety apparel and safety regulations for overhead lifting
identify and safely use gantry cranes up to 4.9 swl, including standards and regulations
identify and use block grabs, slings and chains for lifting blocks or end caps of glass sheets
calculate the weight of glass
safely load and secure glass
relocate blocks and end caps of glass sheets by grabs, slings and chains up to 2 t
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Mechanical glass handling equipment, glass sheet to be relocated, workplace operating procedures and personal protection equipment and an appropriate work area.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant mechanical equipment, block glass sheet, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0324 | LMFGG3003A | Move block/bulk glass sheet by mechanical means | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7820 | LMFGG3003C | Move block bulk glass sheet by mechanical means | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W034 | LMF30602 | Certificate III in Glass and Glazing | Qualification |
| 1477 | 52262 | Certificate II in Glass Processing | Accredited course |