Assemble a temporary modular bridge

Unit of competency Outline

Date retreived
23/07/2026 11:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
RIICTB307D

State Code
WH171

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
2.00

Current Release Date
07/12/2014

View on TGA

State Implementation and Classification

Approved Date

27/05/2014

Field of Education

030901 - Construction Engineering

Original Release Date

27/05/2014

Nominal Hours

Description

This unit describes a participant’s skills and knowledge required to assemble a temporary modular bridge in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.

Notes

Elements and Performance Criteria

1. Plan and prepare to assemble a temporary modular bridge

1.1. Access, interpret and apply temporary modular bridge documentation and ensure the work activity is compliant
1.2. Obtain, interpret, clarify and confirm work instructions before proceeding
1.3. Confirm and apply environmental protection and safety requirements
1.4. Obtain, interpret and implement traffic management signage requirements
1.5. Select and check for faults plant, tools and equipment to carry out tasks
1.6. Select and wear correct personal protective equipment appropriate for work activities
1.7. Identify, confirm, safely handle and locate, ready for work, materials required for the work application
1.8. Identify, address and report hazards, risks and environmental issues
1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Assemble temporary bridge components

2.1. Assess condition of components for acceptable use and discard faulty parts
2.2. Compile components and check inventory
2.3. Mark location points for high capacity panelling
2.4. Select required resources, materials and equipment
2.5. Sequence assembly process prior to commencement
2.6. Assemble interlocking components using connections and fittings
2.7. Re-check completed assembly

3. Launch temporary bridge

3.1. Set out starting approach site
3.2. Set out arrival approach site with the receiving bearing
3.3. Position temporary bridge on the starting approach
3.4. Fit launching nose, inclined upwards, to the first module
3.5. Set up launching pad on the starting approach
3.6. Roll out temporary bridge by winching or pushing
3.7. Cantilever temporary bridge modules, calculated at an angle to achieve reaching the arrival approach, and launch
3.8. Fit launching nose and end module to the receiving bearings at the arrival approach

4. Disassemble temporary bridge components

4.1. Sequence disassembly process prior to commencement
4.2. Select required resources, materials and equipment
4.3. Disassemble interlocking components including connections and fittings
4.4. Compile components and check inventory
4.5. Assemble condition of components for acceptable use and discard faulty parts
4.6. Store components

5. Clean up

5.1. Clear work area and dispose of or recycle materials
5.2. Clean, check, maintain and store machinery, tools and equipment

No information

Replaced By

State Code	National Code	Title	Type
OCY35	RIICTB307E	Assemble and disassemble temporary modular bridges	Unit of competency

State Code	National Code	Title	Type
BFA8	RII30919	Certificate III in Civil Construction	Qualification
AZB0	RII30915	Certificate III in Civil Construction	Qualification