Unit of competency Outline

Date retreived
23/07/2026 8:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dismantle and evaluate engine blocks and sub-assemblies

Dismantle and evaluate engine blocks and sub-assemblies

Unit of competency
National Code
AURTTM008
State Code
AXA40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
70
Description
This unit describes the performance outcomes required to dismantle and evaluate an engine block and its sub-assemblies as part of an engine repair or reconditioning process. It involves preparing for the task, dismantling and evaluating the engine blocks and sub-assemblies, determining required repair action, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The engine blocks and sub-assemblies include those in vehicles from all sectors of the industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to dismantle engine block and sub-assembly
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Engine block and sub assembly dismantling information is sourced and interpreted
  • 1.3 Tools and measuring equipment are selected and checked for serviceability
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Engine is set up for dismantling using appropriate lifting equipment and avoiding fluid spillage according to safety and environmental requirements
  • 1.6 Engine block and sub-assembly are cleaned according to safety and environmental procedures and relevant Australian standards, and positions of auxiliary equipment are recorded, including photographic evidence
2. Dismantle engine block and sub-assembly
  • 2.1 Covers and ancillary components are removed, cleaned and stored according to workshop procedures
  • 2.2 Engine block and sub-assembly are dismantled according to safety requirements and laid out in a logical order using approved methods, tools and equipment
  • 2.3 Component parts are cleaned using appropriate cleaning agents for the type of material and kept in a logical order in preparation for evaluation
3. Determine repair procedures
  • 3.1 Engine block and sub-assembly are inspected, measured and tested against manufacturer specifications and tolerances and according to workplace procedures and safety requirements
  • 3.2 Engine block and sub-assembly are evaluated and repair requirements are determined and reported according to workplace procedures
4. Complete dismantle and evaluation processes
  • 4.1 Final inspection is made to ensure finished work complies with workplace requirements
  • 4.2 Bright surfaces are treated with rust prevention solution and engine block and sub-assembly are prepared for further process or storage according to workplace procedures
  • 4.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC292 AURTTM3008 Dismantle and evaluate engine blocks and sub-assemblies Unit of competency