Unit of competency Outline
Date retreived
22/07/2026 8:45 AM AWST
22/07/2026 8:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct pedestrian road marking operations
Conduct pedestrian road marking operations
Unit of competency
National Code
RIICRM203E
RIICRM203E
State Code
OCX53
OCX53
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/06/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to conduct pedestrian road marking operations, including selecting fuel and lubricants, conducting operator checks and maintenance and using pedestrian road marking plant.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct pedestrian road marking operations
- 1.1 Obtain, interpret, clarify and confirm work instructions
- 1.2 Access, interpret and apply documentation required to conduct pedestrian road marking operations
- 1.3 Identify and implement traffic management signage requirements
- 1.4 Select plant, vehicles, tools and equipment required to carry out tasks and check for faults
- 1.5 Identify and address potential risks, hazards and environmental issues, and implement control measures within scope of own role
- 1.6 Select and wear personal protective equipment according to site requirements
- 1.7 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
- 1.8 Select fuel and lubricants for required equipment operations
2. Carry out operator checks and maintenance
- 2.1 Check and adjust fuel, oil, hydraulic fluid filters and water levels according to job requirements
- 2.2 Tighten and maintain bolts, nuts and attachment couplings
- 2.3 Check function of controls and gauges and adjust where necessary
- 2.4 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures according to manufacturer specifications and site requirements
- 2.5 Carry out scheduled maintenance of plant and equipment according to site requirements and manufacturer specifications
- 2.6 Relocate plant and equipment when not in immediate use
3. Use pedestrian road marking plant
- 3.1 Configure lines according to specifications using a computerised program
- 3.2 Apply lines to required area
- 3.3 Superimpose new lines over old lines on existing surfaces
- 3.4 Operate line cut off device according to job requirements
- 3.5 Apply road marking material to surface according to job requirements
4. Conduct clean-up activities
- 4.1 Clear work area and dispose of or recycle materials according to site requirements
- 4.2 Return surplus fuel, lubricants, paints and beads to storage
- 4.3 Clean, check, perform maintenance on and store vehicles, tools and equipment according to manufacturer specifications and site requirements
- 4.4 Carry out housekeeping activities according to site requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH148 | RIICRM203D | Conduct pedestrian road marking operations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGL0 | RII30920 | Certificate III in Civil Construction | Qualification |