Unit of competency Outline

Date retreived
22/07/2026 8:14 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rig up, conduct pre-spud operations and rig down

Rig up, conduct pre-spud operations and rig down

Unit of competency
National Code
RIIOGD401D
State Code
WH519
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
30/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
30/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to apply rig up, conduct pre-spud operations and rig down in Drilling.This unit is appropriate for those working in supervisory roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare rig up, conduct pre-spud operations and rig down
  • 1.1 Access, interpret and apply rig up, conduct pre-spud operations and rig down documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify, address and report potential hazards, risks and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate to the work activities
  • 1.5 Resolve coordination requirements with others at the site prior to commencing, during, and on completion of work activities
  • 1.6 Carry out pre rig-up procedure inspections (by rig manager, operator and crew)
  • 1.7 Coordinate movement of load and sequence of installation and location
  • 1.8 Check equipment for damage and/or loss by moving contractor and report and BI
2. Rig up to spud
  • 2.1 Receive and action rig manager authorisation to commence rig-up to spud operations
  • 2.2 Receive detailed verbal and written instructions on use and type of mud from the operator and distribute
  • 2.3 Identify potential rig-up problems and take corrective action
  • 2.4 Keep rig manager informed of operations
3. Prepare for drilling of surface hole/subsea hole
  • 3.1 Check drilling and hoist equipment, report damage to rig manager and record
  • 3.2 Conduct equipment checks for nippling-up or cross-checked with relevant procedures
  • 3.3 Check handling equipment for correct sizing and if fit for purpose
  • 3.4 Confirm availability of and inspect, clean, calibrate and record tubulars
  • 3.5 Check well control equipment
  • 3.6 Identify special tool requirements and check if fit for purpose and approved for use
4. Prepare for pre-spud operations
  • 4.1 Lock pipe racks with drill pipe and position drill collars
  • 4.2 Inspect casing running tools for safety and fitness-for-purpose and rectify and/or report faults and malfunctions
  • 4.3 Record casing tallies and report
5. Conduct operations as per drilling program
  • 5.1 Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program
  • 5.2 Continually check mud cleaning equipment and screens for integrity and correct operation
  • 5.3 Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip
  • 5.4 Record correct mud properties on tour report
  • 5.5 Operate all equipment in accordance with manufacturer regulations and company procedures
  • 5.6 Maintain a sound working relationship with third party contractors
No information
No information
Replaced By
State Code National Code Title Type
OBW48 RIIOGD401E Rig up, conduct pre-spud operations and rig down Unit of competency