Unit of competency Outline

Date retreived
22/07/2026 2:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct concrete or steel points and crossings

Construct concrete or steel points and crossings

Unit of competency
National Code
TLIS3040
State Code
AVH63
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/10/2015
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
039907 - Rail Operations
Original Release Date
23/02/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to construct points and crossings with concrete or steel bearers as part of a construction team, in accordance with rail industry standards, safeworking and regulatory requirements, and workplace procedures.It includes preparing for construction work, carrying out relevant construction work, preparing points and crossings for transport, and completing required documentation.People achieving competence in this unit will need to fulfil the applicable state/territory legislated rail safety requirements and to comply with relevant codes of practice and/or guidelines.The unit involves the application of routine operational principles and procedures when constructing points and crossings on concrete or steel bearers, as part of workplace activities across a variety of operational contexts within the Australian rail system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare points and crossings
  • 1.1 Work requirements are determined to identify scope of work and resources required
  • 1.2 Construction design or plan is obtained and interpreted
  • 1.3 Hazards are identified, risks are assessed and control measures are implemented
  • 1.4 Required resources are acquired
  • 1.5 Assembly area is prepared or identified in accordance with workplace procedures
  • 1.6 Delivered materials are checked for compliance with design
2 Assemble points and crossings
  • 2.1 Construction design or plan is implemented in accordance with manufacturer instructions and workplace procedures
  • 2.2 Unsuitable points and crossings equipment replacements are sourced as required, in accordance with workplace procedures
  • 2.3 Dimensions, geometry and condition of points and crossings are checked for compliance with design
  • 2.4 Non compliances are repaired or replaced as required in accordance with workplace procedures
3 Prepare points and crossings for transport
  • 3.1 Transport requirements are confirmed
  • 3.2 Transport requirements are followed in accordance with manufacturer instructions and workplace procedures
  • 3.3 Documentation is completed and processed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
S8325 TLIS3040A Construct concrete or steel points and crossings Unit of competency
Replaced By
State Code National Code Title Type
OCY92 TLIS0001 Construct and assemble points and crossings Unit of competency