Unit of competency Outline

Date retreived
22/07/2026 11:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply basic airbrush techniques to vehicle body panels

Apply basic airbrush techniques to vehicle body panels

Unit of competency
National Code
AURVTP026
State Code
AWZ31
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to apply basic airbrush techniques to a variety of vehicle panels and substrates. It involves preparing for the task, selecting and using specialist tools and equipment, selecting designs and templates, applying refinishing materials according to workplace and customer instructions, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply basic airbrush techniques
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Airbrush specifications are accessed and interpreted
  • 1.3 Airbrush materials are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Airbrush tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work is planned to identify basic airbrush application techniques, minimise waste, and prevent damage to vehicle
2. Apply airbrushing
  • 2.1 Paint surface preparation methods are identified
  • 2.2 Surfaces are prepared for airbrush according to workplace procedures and safety and environmental requirements
  • 2.3 Prepared stencil is airbrushed over to produce a flat and graded wash and geometric shapes
  • 2.4 Visual light and shaded texture is achieved
3. Produce designs and apply clear top coat
  • 3.1 Controlled straight and curved work using airbrush graduation techniques is carried out
  • 3.2 Shading patterns and designs are produced using airbrush graduation techniques
  • 3.3 Clear top coat is prepared using solvent and tack rags
  • 3.4 Clear top coat is applied and checked for texture, depth and gloss
  • 3.5 Surface refinishing is completed according to workplace procedures and timeframes
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF529 AURVTP2026 Carry out basic airbrush application techniques Unit of competency