Unit of competency Outline

Date retreived
23/07/2026 12:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Recommission vessel systems

Recommission vessel systems

Unit of competency
National Code
AURR346660B
State Code
D7666
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
27/09/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
27/09/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to prepare a vessel system for use after seasonal shutdown and storage.It requires the ability to identify and confirm work requirements, test and recommission vessel systems and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Access and interpret repair method, workshop manuals and manufacturer information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Set up work area
2. Recommission vessel systems
  • 2.1. Carry out recommissioning procedures in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Test vessel systems and compare to manufacturer and component specifications
  • 2.3. Determine and report vessel systems which fail testing and gain rectification approval from customer
  • 2.4. Repair and test failed systems
  • 2.5. Commission vessel system
  • 2.6. Determine the need for water testing
3. Clean up work area and finalise work
  • 3.1. Clean and inspect equipment and tooling according to workplace requirements
  • 3.2. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.3. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
  • 3.4. Finalise and process work completion documentation and give to appropriate persons, as required
  • 3.5. Prepare report for the customer detailing work undertaken and technical or regulatory requirements
No information
No information
Replaces
State Code National Code Title Type
W2949 AURR346660A Recommission vessel systems Unit of competency
Replaced By
State Code National Code Title Type
WF318 AURRTA3004 Recommission vessel systems Unit of competency
No information