Unit of competency Outline

Date retreived
22/07/2026 8:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain ceiling surfaces and fittings

Maintain ceiling surfaces and fittings

Unit of competency
National Code
CPPCLO2011
State Code
BBB38
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/06/2017
View on TGA
State Implementation and Classification
Approved Date
25/08/2017
Field of Education
039909 - Cleaning
Original Release Date
25/08/2017
Nominal Hours
12
Description
This unit of competency specifies the outcomes required to maintain ceiling surfaces and fittings in a range of workplace contexts.This unit applies to individuals who perform ceiling cleaning tasks. It includes the ability to assess the cleaning task, identify safety procedures, particularly height assessments.This unit applies to individuals with the ability to follow effectively company policies and procedures and to safely perform their duties alone or in a team environment, under routine supervision and without supervisory responsibilities.Different states and territories may also have regulatory frameworks applicable to this unit or require a working at height licence. Users are advised to check for regulatory limitations.
Notes
Elements and Performance Criteria
1. Identify job requirements.
  • 1.1 Review work order and assess work area to identify cleaning requirements for ceiling surfaces and fittings.
  • 1.2 Identify ceiling surfaces and fittings and soil types on surfaces.
  • 1.3 Identify equipment and chemicals required.
  • 1.4 Assess workplace hazards and work restrictions affecting completion of work order.
  • 1.5 Communicate and clarify issues with supervisor, team member or client.
  • 1.6 Refer to Safety Data Sheets (SDS) and follow safe work methods.
  • 1.7 Position safety signage and barriers to control hazards.
2. Maintain ceiling surfaces and fittings.
  • 2.1 Select, check, and use personal protective equipment (PPE).
  • 2.2 Safely move furniture and fittings that impede cleaning operation.
  • 2.3 Cover floor, furniture, and equipment with drop sheets.
  • 2.4 Select cleaning technique.
  • 2.5 Select equipment, including ladder and or step stool and check for correct operation and safe use.
  • 2.6 Calculate and prepare chemicals following manufacturers’ instructions and job requirements.
  • 2.7 Clean ceiling and fittings attached to ceiling in accordance with workplace procedures.
  • 2.8 Vacuum difficult-to-reach areas.
3. Tidy work site.
  • 3.1 Tidy work area and dispose of collected soil and waste in accordance with environmental requirements.
  • 3.2 Remove drop sheets from furniture and equipment.
  • 3.3 Safely replace furniture and fittings.
4. Complete tasks.
  • 4.1 Safely clean equipment and PPE, as required by workplace standards.
  • 4.2 Clean equipment and check for damage and wear before storing.
  • 4.3 Safely store equipment, chemicals, and PPE to allow ready-to-use access.
  • 4.4 Report malfunctions, faults, wear or damage to cleaning equipment and environs to supervisor.
  • 4.5 Complete workplace cleaning schedule.
No information
No information
No information
State Code National Code Title Type
BDJ5 CPP20617 Certificate II in Cleaning Qualification