Unit of competency Outline

Date retreived
23/07/2026 11:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diagnose and rectify faults in renewable energy (RE) control systems

Diagnose and rectify faults in renewable energy (RE) control systems

Unit of competency
National Code
UEERE0069
State Code
OEV06
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
16/03/2023
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
16/03/2023
Nominal Hours
54
Description
This unit involves the skills and knowledge required to diagnose and rectify faults in renewable energy (RE) control systems.It includes preparing to work on RE control systems,diagnosing and rectifying faults in RE control systems, and completing and reporting fault-finding and repair activities.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c).Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Notes
Elements and Performance Criteria
1 Prepare to diagnose and rectify faults
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and procedures for relevant work area are identified and applied in accordance with workplace procedures
  • 1.2 The nature of the fault/issue is identified from stakeholders and relevant data and documentation
  • 1.3 Requirements for working with other stakeholders are confirmed and applied
  • 1.4 Required materials, tools, apparatus and testing devices are identified, accessed and checked for correct operation and safety
  • 1.5 Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures
2 Diagnose and rectify faults in RE control systems
  • 2.1 Circuits/apparatus are isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.2 Nature of reported fault/issue is verified
  • 2.3 System testing is conducted and documented
  • 2.4 Fault/s are diagnosed, faulty equipment is identified, and the replacement products required are documented
  • 2.5 System is made safe, faulty apparatus is dismantled, recorded and stored in accordance with manufacturer guides and stakeholder instructions
  • 2.6 Repaired or replaced apparatus is assembled in accordance with manufacturer guidelines, industry standards and regulation
3 Complete and report fault-finding and repair activities
  • 3.1 Repaired apparatus is tested and commissioned in accordance with manufacturer guidelines, industry standards and regulation
  • 3.2 Work area is cleaned and made safe
  • 3.3 Repair is documented and stakeholders notified
No information
No information
Replaces
State Code National Code Title Type
OBZ58 UEERE0034 Diagnose and rectify faults in renewable energy (RE) control systems Unit of competency