Unit of competency Outline

Date retreived
22/07/2026 9:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Tune Process Plant and Equipment

Tune Process Plant and Equipment

Unit of competency
National Code
UEPOPS511A
State Code
S5295
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
31/05/2011
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
31/05/2011
Nominal Hours
80
Description
1)
This unit deals with the skills and knowledge required to complete the investigation, nomination and adjustments of tuning parameters associated with generation plant, equipment and processes.
Notes
Elements and Performance Criteria
1 Plan and prepare
  • 1.1 Tuning requirements are identified from relevant personnel and documentation
  • 1.2 Resource and equipment requirements are identified and obtained
  • 1.3 Tuning program is coordinated with the appropriate personnel and plant availability, capability and limitations are identified
  • 1.4 Testing and monitoring equipment are connected in accordance with test requirements and plant integrity
  • 1.5 Plant coordinated to initial operating state ready for testing in accordance with statutory, industry and enterprise/site procedure standards
  • 1.6 Test procedure and recording documentation are prepared
  • 1.7 Test equipment is calibrated in accordance with relevant standards and/or manufacturer's procedures
  • 1.8 Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training
2 Test plant and implement tuning
  • 2.1 Testing and tuning is performed in accordance with tuning program, variations are assessed and accommodated to enable test objectives to be met
  • 2.2 Results are analysed with reference to desired outcomes and new settings are determined
  • 2.3 Accuracy of test results is assessed in analysis of test data and corrections made as required
  • 2.4 Plant is retuned to achieve desired outcomes
3 Complete documentation
  • 3.1 All relevant records and documentation are updated and retained in accordance with enterprise/site requirements
  • 3.2 Nominated changes to equipment operational settings are recommended to appropriate personnel
  • 3.3 Implementation of recommendations are monitored to ensure combustion efficiency
No information
No information
Replaces
State Code National Code Title Type
AYF92 UTPNEG237A Tune process plant and equipment Unit of competency
Replaced By
State Code National Code Title Type
WE441 UEPOPS511B Tune process plant and equipment Unit of competency
State Code National Code Title Type
S508 UEP50106 Diploma of ESI Generation (Systems Operations) Qualification