Unit of competency Outline

Date retreived
23/07/2026 4:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assess glass and glazing requirements

Assess glass and glazing requirements

Unit of competency
National Code
MSFGG3002
State Code
WI484
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040323 - Glazing
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers assessing and identifying glass and glazing requirements for buildings to comply with Australian Standards. It involves determining and evaluating glass and glazing requirements and may be performed in workplaces which are involved in the manufacture, processing and/or installation of sheet glass. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Customer requirements and expectations regarding glass and glazing work or technical advice are identified
  • 1.2 Work health and safety (WHS) requirements for assessing glass and glazing requirements are observed throughout the work
  • 1.3 Requirements are recorded according to workplace procedures and requirements
  • 1.4 The process for assessing glass and glazing requirements is identified
2 Prepare for work
  • 2.1 Work sequence is planned in a logical order to suit the job
  • 2.2 Research materials are accessed and analysed for applicability
  • 2.3 Product supply sources are contacted to ascertain current developments, if appropriate
3 Conduct assessment
  • 3.1 Influencing factors are identified and their significance and impact on the end product determined
  • 3.2 Products/types of glass are identified and their application determined
  • 3.3 Technical or other professional advice is sought, if applicable and available, in accordance with workplace procedures
  • 3.4 Optimal solution is identified and specifications confirmed
4 Complete work
  • 4.1 Solution is converted into work instructions/job orders in accordance with workplace procedures
  • 4.2 Other documentation, including any advice/referral to customer, is completed in accordance with workplace practices
No information
No information
Replaces
State Code National Code Title Type
S7819 LMFGG3002C Assess glass and glazing requirements Unit of competency
Replaced By
State Code National Code Title Type
OAJ15 MSFGG3029 Assess glass and glazing requirements Unit of competency
State Code National Code Title Type
J732 MSF30413 Certificate III in Glass and Glazing Qualification