Unit of competency Outline
Date retreived
23/07/2026 8:00 AM AWST
23/07/2026 8:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use upholstery sector hand and power tools
Use upholstery sector hand and power tools
Unit of competency
National Code
LMFUP2001B
LMFUP2001B
State Code
W8805
W8805
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/09/2008
Nominal Hours
48
Description
This unit covers the competency to use hand and power tools in applications relating to the upholstery sector of the furnishing industry.
Notes
Elements and Performance Criteria
1. Identify hand and power tools
- 1.1. Types of hand and power tools and their functions are identified
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Sources of and access to power supply are recognised
2. Select hand tools
- 2.1. Hand tools selected are consistent with needs of the job
- 2.2. Selected hand tools are checked for serviceability and safety and any faults reported to supervisor in accordance with enterprise procedures
- 2.3. Equipment is selected to hold or support material for hand tools application where applicable
3. Use hand tools
- 3.1. Material is located and held in position for hand tool application
- 3.2. Hand tools are safely and effectively used according to their intended use
- 3.3. Hand tools are safely located when not in immediate use
4. Select power tools
- 4.1. Power tools are selected consistent with needs of the job in accordance with conventional work practice
- 4.2. Power tools are visually checked for serviceability/safety in accordance with OHS requirements and any faults reported to supervisor in accordance with enterprise procedures
- 4.3. Equipment is selected to hold or support materials for power tool application as applicable
5. Use power tools
- 5.1. Material is located and held in position for power tool application as applicable
- 5.2. Power tools are safely and effectively used in application processes
- 5.3. Power tools are switched off and positioned safely when not in use
6. Clean up work area and tools
- 6.1. All tools are cleaned, maintained and stored
- 6.2. Equipment is cleaned, maintained and stored
- 6.3. Documentation is completed in accordance with enterprise procedures
- 6.4. Work area is cleared and waste removed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving the use of hand and power tools in applications relating to the upholstery sector of the furnishing industry
OHS requirements include legislation, material safety management systems, hazardous substances and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to work tasks
Hand tools for furniture upholstery are to include:
shears/scissors
tape measure
rulers
staple remover
pincers
side cutters
pliers
hammer
screwdrivers and magnetic tack hammer
Hand tools for furniture upholstery may also include:
button press and cutters
knife (retractable blade)
needles (bag
buttoning
regulator)
drills
web strainer
ripping chisel
web pliers
bolt cutters
rotating hole punch
saws
hand planes
files and rasps
sockets
adjustable spanners
vices
clamps
wood chisels
nail punch
wire bender
seam stretcher
pipe/tube bender
stud press
pop rivet gun
no-sag spring benders (for shapes and ends)
hand ventilation setter
foam slicer
white rubber mallet
no-sag guillotine
soft tipped mallet
stuffing iron tack remover
cross pane hammer and tin snips
Power tools - including pneumatic tools
Power tools for furniture upholstery include:
spray adhesive system
staple gun
drills and screwdrivers
fabric cutter
nail gun
hot melt glue gun
buttoning machine
circular saw
drop saw
band saw
silicone cartridge gun
drill press
grinder
hot knife
electric iron
lacquer spray gun
knife fabric cutters (circular and straight)
electric/pneumatic foam cutter
planers and sanders
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written in conformance with workplace procedures
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices. It may include:
safety goggles/glasses
hair net
ear muffs/plugs
gloves
footwear
overalls/apron
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
This unit covers work involving the use of hand and power tools in applications relating to the upholstery sector of the furnishing industry
OHS requirements include legislation, material safety management systems, hazardous substances and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to work tasks
Hand tools for furniture upholstery are to include:
shears/scissors
tape measure
rulers
staple remover
pincers
side cutters
pliers
hammer
screwdrivers and magnetic tack hammer
Hand tools for furniture upholstery may also include:
button press and cutters
knife (retractable blade)
needles (bag
buttoning
regulator)
drills
web strainer
ripping chisel
web pliers
bolt cutters
rotating hole punch
saws
hand planes
files and rasps
sockets
adjustable spanners
vices
clamps
wood chisels
nail punch
wire bender
seam stretcher
pipe/tube bender
stud press
pop rivet gun
no-sag spring benders (for shapes and ends)
hand ventilation setter
foam slicer
white rubber mallet
no-sag guillotine
soft tipped mallet
stuffing iron tack remover
cross pane hammer and tin snips
Power tools - including pneumatic tools
Power tools for furniture upholstery include:
spray adhesive system
staple gun
drills and screwdrivers
fabric cutter
nail gun
hot melt glue gun
buttoning machine
circular saw
drop saw
band saw
silicone cartridge gun
drill press
grinder
hot knife
electric iron
lacquer spray gun
knife fabric cutters (circular and straight)
electric/pneumatic foam cutter
planers and sanders
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written in conformance with workplace procedures
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices. It may include:
safety goggles/glasses
hair net
ear muffs/plugs
gloves
footwear
overalls/apron
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Locate and apply relevant information related to sector hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment before, during and after use of hand and power tools
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify each of the upholstery sector hand and power tools
indicate their applications and limitations
effectively and safely use them in their appropriate role in the workplace environment
maintain and safely store them
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Furniture upholstery sector hand and power tools and materials.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency which together form a part of the job role.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Locate and apply relevant information related to sector hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment before, during and after use of hand and power tools
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
identify each of the upholstery sector hand and power tools
indicate their applications and limitations
effectively and safely use them in their appropriate role in the workplace environment
maintain and safely store them
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Furniture upholstery sector hand and power tools and materials.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency which together form a part of the job role.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0400 | LMFUP2001A | Use upholstery sector hand and power tools | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI661 | MSFUP2001 | Use upholstery sector hand and power tools | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W038 | LMF31002 | Certificate III in Upholstery | Qualification |
| W028 | LMF20802 | Certificate II in Upholstery | Qualification |