Unit of competency Outline
Date retreived
22/07/2026 7:00 AM AWST
22/07/2026 7:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform instrument departure - non published procedure
Perform instrument departure - non published procedure
Unit of competency
National Code
AVIY5027A
AVIY5027A
State Code
WB877
WB877
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
21/03/2013
Field of Education
031505 - Aircraft Operation
Original Release Date
21/03/2013
Nominal Hours
20
Description
This unit involves the skills and knowledge required to plan and conduct a departure from an aerodrome without a published instrument departure procedure, i.e. non Standard Instrument Departure (SID) or Standard Radar Departure (SRD). It covers intercepting track within 5 nm, while maintaining obstacle clearance during climb to Lowest Safe Altitude (LSALT). This includes managing traffic separation using the radiotelephone in Instrument Meteorological Conditions (IMC)/simulated IMC under the Instrument Flight Rules (IFR). Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1Determine applicable standards for an instrument departure (non SID/SRD)
- 1.1 Standard take-off minima is determined in accordance with the aerodrome using Aeronautical Information Publication (AIP)
- 1.2 Departure is planned to ensure the aircraft can maintain obstacle and terrain clearance after take-off and during the climb to LSALT
- 1.3 Ceiling minima is increased and/or track is planned to ensure terrain clearance is maintained when required
2Take off and climb to cruising altitude/level under the IFR (non SID/SRD)
- 2.1 Appropriate checklist items are completed and confirmed to ensure the aircraft systems applicable to the instrument take-off are operating correctly
- 2.2 Radios, navigation aids and flight instruments are set to the desired setting prior to initiating the take-off
- 2.3 Track, altitude requirements and emergency procedures are reviewed and briefed for an instrument departure
- 2.4 Climb to cruising altitude/level after take-off is achieved
- 2.5 Obstacle and terrain clearance is maintained below LSALT while intercept track is maintained within 5 nm of the departure aerodrome
- 2.6 Transitions from visual meteorological conditions to actual or simulated instrument meteorological conditions are performed without loss of control of the aircraft
- 2.7 Radio transmissions are performed in accordance with AIP requirements
- 2.8 Separation from other traffic is maintained
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Tasks may be undertaken in:
IMC
VMC with simulated IMC conditions
Performance may be demonstrated in:
single engine aircraft
multi engine aircraft
synthetic training device approved by the appropriate authority
variable air traffic conditions
variable weather conditions
variable flight situations
abnormal situations
classes of airspace as designated by the Civil Aviation Safety Authority
Aircraft may include:
fixed wing
helicopter
other commercial or military aircraft
Crew may include:
single pilot
multi crew
Instruments may be:
flight instruments suitable for instrument flight
head up display suitable for instrument flight
Limitations may be imposed by:
local noise abatement requirements and curfews
airspace endorsements
Classes of airspace may be:
as designated by the regulator
restricted and danger areas
military control zones
Air Defence Identification Zones
Navigation aids may include:
ADF (Automatic Direction Finder)
VOR (VHF Omni-directional Radio Range)
DME (Distance Measuring Equipment)
RADAR
GPS (Global Positioning System)
FMS (Flight Management Systems)
Moving Map Displays
TACAN
INS
Conditions may include:
a method of simulating IMC
simulated icing conditions
moderate turbulence
simulated hazardous weather
Autopilot/Flight Director
FMS/ other NAV system
simulation of emergency and abnormal procedures
Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
standard operating procedures
Information/documents may include:
relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
Flight Manual/Pilot's Operating Handbook (POH)
Manual of Standards - Pilot Licensing (MOS-PL)
Aeronautical Information Publication (AIP)
En Route Supplement Australia (ERSA)
charts
operations manuals
approved checklists
workplace procedures and instructions and job specification
induction and training materials
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
relevant Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
relevant Australian Standards
Performance includes tolerances specified in either of:
relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:
Manual of Standards
relevant Defence documentation such as:
Defence Orders and Instructions
approved curricula and training documentation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Tasks may be undertaken in:
IMC
VMC with simulated IMC conditions
Performance may be demonstrated in:
single engine aircraft
multi engine aircraft
synthetic training device approved by the appropriate authority
variable air traffic conditions
variable weather conditions
variable flight situations
abnormal situations
classes of airspace as designated by the Civil Aviation Safety Authority
Aircraft may include:
fixed wing
helicopter
other commercial or military aircraft
Crew may include:
single pilot
multi crew
Instruments may be:
flight instruments suitable for instrument flight
head up display suitable for instrument flight
Limitations may be imposed by:
local noise abatement requirements and curfews
airspace endorsements
Classes of airspace may be:
as designated by the regulator
restricted and danger areas
military control zones
Air Defence Identification Zones
Navigation aids may include:
ADF (Automatic Direction Finder)
VOR (VHF Omni-directional Radio Range)
DME (Distance Measuring Equipment)
RADAR
GPS (Global Positioning System)
FMS (Flight Management Systems)
Moving Map Displays
TACAN
INS
Conditions may include:
a method of simulating IMC
simulated icing conditions
moderate turbulence
simulated hazardous weather
Autopilot/Flight Director
FMS/ other NAV system
simulation of emergency and abnormal procedures
Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
standard operating procedures
Information/documents may include:
relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
Flight Manual/Pilot's Operating Handbook (POH)
Manual of Standards - Pilot Licensing (MOS-PL)
Aeronautical Information Publication (AIP)
En Route Supplement Australia (ERSA)
charts
operations manuals
approved checklists
workplace procedures and instructions and job specification
induction and training materials
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
relevant Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
relevant Australian Standards
Performance includes tolerances specified in either of:
relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:
Manual of Standards
relevant Defence documentation such as:
Defence Orders and Instructions
approved curricula and training documentation
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S6844 | AVI5Y2708A | Perform instrument departure - non published procedure | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVX43 | AVIY5027 | Perform non published instrument departure procedures | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S635 | AVI50408 | Diploma of Aviation (Instrument Flight Operations) | Qualification |