Unit of competency Outline
Date retreived
22/07/2026 8:41 AM AWST
22/07/2026 8:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Repair and overhaul bicycle suspension systems
Repair and overhaul bicycle suspension systems
Unit of competency
National Code
AURBTD004
AURBTD004
State Code
AXE45
AXE45
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair and overhaul bicycle suspension systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, repairing and testing the bicycle suspension and components, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair and overhaul bicycle suspension system
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
- 1.3 Hazards associated with the work are identified and risks are managed
- 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- 1.5 Work is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Inspect suspension system
- 2.1 Bicycle suspension system is checked for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
- 2.2 Repair and replacement options are identified, documented and costed for customer approval according to workplace procedures
- 2.3 Work area, replacement parts and bicycle are prepared for repair work
3. Carry out repair and overhaul of suspension system
- 3.1 Repair and overhaul activities are carried out according to workplace procedures, work plan, and safety and environmental requirements
- 3.2 Required replacement parts are checked and fitted according to manufacturer specifications
- 3.3 Repaired suspension system is checked and tested for correct operation according to manufacturer specifications
- 3.4 Repaired suspension system is adjusted and aligned as required according to workplace procedures
- 3.5 Results and quality issues are reported to authorised personnel as required
4. Complete work processes
- 4.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF054 | AURBTD3004 | Repair and overhaul bicycle suspension systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCK42 | AURBTD104 | Repair and overhaul bicycle suspension systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAE5 | AUR30216 | Certificate III in Bicycle Workshop Operations | Qualification |