Unit of competency Outline

Date retreived
23/07/2026 12:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres

Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres

Unit of competency
National Code
MSFFM3045
State Code
OEJ92
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
70
Description
This unit describes the skills and knowledge required to set up, operate and maintain CNC machining and processing centres to manufacture products.Workers with this competency follow established procedures, using discretion, judgment and problem solving to identify and resolve routine product and machine issues.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Select material for machining and confirm it meets task and workplace quality requirements
  • 1.4 Identify and confirm procedures for waste minimisation and energy efficiency
2. Set up for machining and processing
  • 2.1 Set CNC program to meet task requirements
  • 2.2 Confirm operational readiness of safety equipment and emergency stops, gauges, guards and controls prior to machine start-up
  • 2.3 Complete machining and processing settings and adjustments in accordance with task requirements and machining and processing and tool manufacturer instructions
  • 2.4 Check and confirm safe and effective operation of machines, cutting tools and jigs
  • 2.5 Complete trial runs to check machine operation, accuracy and quality of finished work
  • 2.6 Make final adjustments to CNC programs and equipment in accordance with task requirements and workplace procedures
3. Operate machining and processing centres
  • 3.1 Operate machining and processing centres in accordance with its designed capacity and purpose, and to manufacturer recommendations
  • 3.2 Monitor machine operation to ensure product quality and output
  • 3.3 Check waste quantities and make adjustments to minimise waste
  • 3.4 Identify items that do not meet quality requirements and recycle or discard in accordance with workplace procedures
  • 3.5 Recognise problems with product or machine operation and resolve or report to appropriate persons in accordance with workplace procedures
  • 3.6 Follow authorised changes in working procedures
4. Finalise task
  • 4.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.2 Clean machinery, complete routine maintenance and leave in safe mode in accordance with workplace procedures
  • 4.3 Identify, tag and report faulty equipment in accordance with workplace procedures
No information
No information
State Code National Code Title Type
BIK0 MSF30322 Certificate III in Cabinet Making and Timber Technology Qualification