Unit of competency Outline

Date retreived
22/07/2026 3:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Control lift and movement of crane

Control lift and movement of crane

Unit of competency
National Code
TLID3040
State Code
AWM54
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/02/2016
View on TGA
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/08/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to control the lift and movement of a crane when the load is out of the crane operator’s view, in accordance with workplace principles, procedures and regulations. It includes providing lift instructions to the crane operator using appropriate communication methods, monitoring the lift and placing and securing a load.Work must be carried out in compliance with the relevant state/territory authority licence/permit requirements and regulations for operating mobile cranes up to and including 20 tonnes.Work is performed with limited or minimum supervision, and with limited accountability and responsibility for self and others in achieving prescribed outcomes. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Provide lift instructions
  • 1.1 Load movement is performed in accordance with planned hazard prevention and control measures in line with appropriate Australian standards, codes of practice, guidelines and manufacturer specifications
  • 1.2 Agreed communication and signal methods are used to safely coordinate load movement
  • 1.3 Clear, precise and concise verbal communication and signals are used
  • 1.4 All relevant parameters are taken into account in instructions to ensure a safe, stable and smooth lift
2 Monitor lift
  • 2.1 Load is constantly monitored to ensure it remains stable
  • 2.2 Load conditions that may affect continuing stability are identified and monitored
  • 2.3 Temporary bracing and/or load support is maintained until continuing stability is ensured
  • 2.4 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.5 Site emergency procedures are followed
3 Place and secure load
  • 3.1 Appropriate materials for fixing and anchoring the load are checked and selected in line with manufacturer specifications
  • 3.2 Appropriate fixing methods are used to secure load in line with manufacturer specifications and guidelines
  • 3.3 Temporary securing is installed where hazards and weather conditions may vary during the load movement
No information
No information
Replaces
State Code National Code Title Type
D5087 TLID3040A Control lift and movement of crane Unit of competency
Replaced By
State Code National Code Title Type
OBR12 TLID0003 Control lift and movement of crane Unit of competency