Unit of competency Outline

Date retreived
22/07/2026 1:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up double-faced web

Set up double-faced web

Unit of competency
National Code
ICPCBF2160
State Code
OBP27
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
20
Description
This unit describes the skills and knowledge required to set up a double-faced web for corrugated board manufacture involving the reel in-feed, splicer, bridge, pre-heater, double backer, curing, coating and waxing sections of a corrugator.It applies to individuals in the printing and graphic arts industry who set up double-faced web for corrugated board manufacture to meet production requirements. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for set-up
  • 1.1 Read and interpret job specifications from job documentation and process control system
  • 1.2 Identify and undertake machine requirements for set-up
  • 1.3 Estimate, check and order paper and board quantity requirements
2. Set up reel transportation system
  • 2.1 Establish and adjust unwind reel according to job specifications
  • 2.2 Carry out webbing procedures according to machinery requirements
  • 2.3 Set up and adjust web control system
  • 2.4 Splice and join reels
3. Set up machine for double facing
  • 3.1 Set up and adjust starch delivery system to suit corrugating process
  • 3.2 Set rider roll to correct pressure
  • 3.3 Set up and adjust heat delivery system to suit corrugating process
4. Set up in-line units
  • 4.1 Prepare and adjust wax units to suit corrugating process
  • 4.2 Set up and adjust coating units to suit corrugating process
  • 4.3 Prepare and adjust tape dispensing units to suit corrugating process
  • 4.4 Set up and adjust slitters
  • 4.5 Prepare and adjust cut-off knife according to work health and safety (WHS) requirements
5. Inspect and adjust quality
  • 5.1 Organise inspection and testing of sample according to enterprise procedures
  • 5.2 Inspect and test sample
  • 5.3 Interpret results to determine adjustment requirements
  • 5.4 Carry out adjustments according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
AUO88 ICPCBF216 Set up double-faced web Unit of competency
State Code National Code Title Type
BFC3 ICP20120 Certificate II in Printing and Graphic Arts Qualification