Unit of competency Outline

Date retreived
22/07/2026 1:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply quality systems to work

Apply quality systems to work

Unit of competency
National Code
UEPOPS003
State Code
ODZ18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/04/2022
View on TGA
State Implementation and Classification
Approved Date
14/04/2023
Field of Education
080317 - Quality Management
Original Release Date
14/04/2023
Nominal Hours
18
Description
This unit involves the skills and knowledge required to apply a quality assurance system to work.Quality control is a process to ensure that significant variations in quality are kept to a minimum. Quality control in a power generation facility will focus on a set of procedures intended to ensure that personnel, plant and equipment operate smoothly and efficiently. Competency in this unit requires the ability to plan and prepare quality procedures, conduct quality system practices and initiate changes to quality systems. Individuals will, in general, work as an operator in a power generation facility. No licensing, legislative or certification requirements apply from this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to work withquality systems
  • 1.1 Quality procedures are identified from relevant personnel and documentation in accordance with workplace procedures
  • 1.2 Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
  • 1.3 Performance objectives are identified in accordance with Quality Management System (QMS) and workplace procedures
  • 1.4 Work plan is structured to ensure quality standards are achieved in accordance with workplace procedures
2 Conduct quality systempractices
  • 2.1 Quality assurance processes and procedures are implemented in accordance with manufacturers’ recommendations and specifications, and workplace procedures
  • 2.2 Work is monitored against quality standards and sustainable energy principles, and clarified with relevant personnel in accordance with workplace procedures
  • 2.3 Allocated work tasks are completed in accordance with quality assurance requirements and workplace procedures
3 Initiate changes to quality systems
  • 3.1 Improvements to quality assurance procedures are identified by analysis of system outcomes in accordance with quality assurance requirements and workplace procedures
  • 3.2 Extent of proposed changes to quality procedures are investigated in accordance with quality assurance requirements and workplace procedures
  • 3.3 Proposed improvements are negotiated and confirmed with relevant personnel in accordance with quality assurance requirements and workplace procedures
No information
No information
Replaces
State Code National Code Title Type
OAH44 UEPOPS202 Apply quality systems to work Unit of competency