Unit of competency Outline

Date retreived
22/07/2026 11:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct workboat/barge operations

Conduct workboat/barge operations

Unit of competency
National Code
RIIMEX204D
State Code
WH380
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
28/05/2014
Nominal Hours
50
Description
This unit describes a participant’s skills and knowledge required to conduct workboat/barge operations in Coal and Metalliferous mining and Extractive.This unit is appropriate for those working in operational roles.No licensing or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for workboat/barge operations
  • 1.1 Access, interpret and apply workboat/barge operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Access, interpret and clarify survey data for the work activity
  • 1.6 Communicate and coordinate activities with others prior to, during and on completion of the work activity
  • 1.7 Obtain and interpret emergency procedures, and be prepared for an emergency
2. Operate workboat/barge
  • 2.1 Carry out pre-start, start-up, mooring and shutdown procedures
  • 2.2 Relocate, position and secure workboat/barge for operation
  • 2.3 Select, interpret and apply operating techniques, and ensure effectiveness of operation in changing work conditions
  • 2.4 Conduct, control and monitor operations
  • 2.5 Act on or report monitoring systems and alarms
  • 2.6 Continually monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
  • 2.7 Complete the work plan within the operating capacity of the equipment
3. Carry out post-operational procedures
  • 3.1 Inspect, fault find, report faults and recommend corrective actions
  • 3.2 Process written records and reports
4. Conduct housekeeping activities
  • 4.1 Clean, check, maintain and store plant, tools and equipment
  • 4.2 Report issues identified with plant, tools and equipment
No information
No information
No information