Unit of competency Outline

Date retreived
22/07/2026 3:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce electrical schematic drawings

Produce electrical schematic drawings

Unit of competency
National Code
MEM09205
State Code
OEX24
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
72
Description
This unit of competency defines the skills and knowledge required to produce electrical schematic drawings complying with Australian and international standards and is primarily for those working within a drafting work environment with engineering or manufacturing applications.Critical dimensions and specifications for the drawing are predetermined and drawings are produced under supervision. Drawings may be carried out with or without the use of computer-aided design (CAD) systems, and show the physical arrangement of components, electrical circuits and connections between devices, using appropriate symbols. A matching reference list of circuit components is also produced.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Identify job requirements from available information and identify and address further information needs
  • 1.4 Determine purpose, scope and information requirements for drawing
  • 1.5 Identify and prepare equipment required to complete work
2. Identify system requirements
  • 2.1 Identify and apply codes, standards and symbols used for electrical diagrams and drawings
  • 2.2 Identify function and purpose of circuit and its components and assemblies
  • 2.3 Identify environmental implications of inefficient systems and strategies for minimising impact
3. Prepare electrical drawings and diagrams
  • 3.1 Lay out drawing in accordance with the sketches and specifications
  • 3.2 Prepare an electrical block diagram in accordance with Australian Standards
  • 3.3 Draw cable run and multi-storey riser diagrams from schedules
  • 3.4 Produce switchboard layout drawings
  • 3.5 Prepare single line and interconnecting electrical diagrams in accordance with Australian Standards
  • 3.6 Prepare wiring and circuit diagrams in accordance with Australian Standards
4. Prepare materials list
  • 4.1 Select components and materials from supplier catalogues using predetermined specifications
  • 4.2 Produce a parts list in accordance with SOPs
  • 4.3 Store drawings and materials list in accordance with SOPs
5. Consult with other disciplines
  • 5.1 Verify the parameters of the brief and clarify specifications with appropriate personnel
  • 5.2 Identify and consult with support services
  • 5.3 Present and explain drawings at appropriate stages of the project
No information
No information
Replaces
State Code National Code Title Type
WE060 MEM09205A Produce electrical schematic drawings Unit of competency