Unit of competency Outline
Date retreived
23/07/2026 12:29 AM AWST
23/07/2026 12:29 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate roller/compactor
Operate roller/compactor
Unit of competency
National Code
RIIMPO205B
RIIMPO205B
State Code
WC356
WC356
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/08/2012
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/08/2012
Nominal Hours
20
Description
This unit covers operating of roller/compactors in metalliferous mining operations. It includes: planning and preparing for operations; carrying out compacting; and conducting housekeeping activities.Note: the title of this unit is Operate roller/compactor, it is displayed as Operate roller_compactor because the TGA content management system does not accept '/' as text.
Notes
Elements and Performance Criteria
1. Plan and prepare for operations
- 1.1. Access, interpret and apply compliance documentation relevant to operating of roller and compactors
- 1.2. Receive, interpret and clarify shift change over details
- 1.3. Select appropriate type of equipment and/or attachments according to job specifications and to maximise efficiency and effectiveness of work activities
- 1.4. Identify, address and report potential hazards and risks
- 1.5. Select personal protective equipment appropriate for work activities
- 1.6. Conduct equipment pre-start checks to ensure equipment is ready for operation
- 1.7. Identify, address and report environmental issues
- 1.8. Communicate with other personnel using approved communication methods
- 1.9. Adhere to emergency procedures to ensure safety of personnel, plant and equipment
2. Carry out compacting
- 2.1. Carry out start-up, park and shutdown procedures
- 2.2. Operate equipment within recommended speed, engine capability and limitations
- 2.3. Manoeuvre equipment to maximise efficiency and ensure safety of other equipment and personnel
- 2.4. Assess materials and site conditions to determine appropriate operation technique
- 2.5. Remove or manage contaminants upon identification
- 2.6. Compact to required degree of compaction
- 2.7. Monitor equipment performance utilising appropriate indicators to aid efficient operations
3. Conduct housekeeping activities
- 3.1. Clean equipment
- 3.2. Clean and store attachments and other ancillary equipment
- 3.3. Complete all required records and documentation accurately and promptly
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant compliance documentation
may include:
legislative, organisation and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
codes of practice
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Rollers and compactors may include:
dozer
front end loader where rollers are attached
rollers
tractors
Capacity of equipment and/or attachments may include:
duration of operation
efficient and safe operating speed
operating limitations
type of activities performed
weight and/or load limitations
Potential hazards and risks may include:
abandoned equipment
adjoining pit walls
adverse weather conditions (electrical storms, floods) fires
chemicals
contaminants
equipment
fences
holes
materials
over-hanging rocks
personnel
pot holes
unsafe ground
unstable faces
vehicles
Pre-start checks may include:
air filter restriction indicator
cab (horn, lights, air conditioner)
computer systems
display instrumentation and gauges (indicators, gauges, laser levels)
engine and stop engine lights (orange and red)
fluid levels (windscreen washer tank, hydraulic oil, coolant, grease, water, engine oil, fuel)
visual and audio warning devices and lights
Environmental issues may include:
culturally- sensitive sites and artefacts
drainage
dust
emissions
flora and fauna
hazardous chemicals
heritage legislation
noise
runoff
spills
water quality
Start-up, park and shutdown procedures may include:
correct location of equipment
safety mechanisms operational (horn, operating lights)
vehicle is left secured
Materials may include:
gravel
ore
overburden
oxidised waste
rejects
road base
rubbish
sand
sulphide rock fill
tailings
topsoil
water
Site conditions may include:
broken ground
day and night
degree of compaction
location of water table
slope of working surface
stable ground (compaction) amount of scale
wet and dry
working over old underground workings and voids
Contaminants may include:
animal carcasses (sheep, cows, kangaroos)
cigarette butts
consumables
ear plugs
metal bucket teeth
metal or steel rods
old fencing
old piping
plastic
timber
Indicators may include:
brake air pressure
brake oil temperature
computer indicators
engine oil pressure
fuel filter
parking brake
retarder
service meter
speedometer/odometer
steering filters
tachometer
torque converter oil temperature
transmission filter
voltmeter
water temperature
Cleaning methods may include:
water
steam cleaning
degreasing
vacuum
forced air
Relevant compliance documentation
may include:
legislative, organisation and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
codes of practice
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Rollers and compactors may include:
dozer
front end loader where rollers are attached
rollers
tractors
Capacity of equipment and/or attachments may include:
duration of operation
efficient and safe operating speed
operating limitations
type of activities performed
weight and/or load limitations
Potential hazards and risks may include:
abandoned equipment
adjoining pit walls
adverse weather conditions (electrical storms, floods) fires
chemicals
contaminants
equipment
fences
holes
materials
over-hanging rocks
personnel
pot holes
unsafe ground
unstable faces
vehicles
Pre-start checks may include:
air filter restriction indicator
cab (horn, lights, air conditioner)
computer systems
display instrumentation and gauges (indicators, gauges, laser levels)
engine and stop engine lights (orange and red)
fluid levels (windscreen washer tank, hydraulic oil, coolant, grease, water, engine oil, fuel)
visual and audio warning devices and lights
Environmental issues may include:
culturally- sensitive sites and artefacts
drainage
dust
emissions
flora and fauna
hazardous chemicals
heritage legislation
noise
runoff
spills
water quality
Start-up, park and shutdown procedures may include:
correct location of equipment
safety mechanisms operational (horn, operating lights)
vehicle is left secured
Materials may include:
gravel
ore
overburden
oxidised waste
rejects
road base
rubbish
sand
sulphide rock fill
tailings
topsoil
water
Site conditions may include:
broken ground
day and night
degree of compaction
location of water table
slope of working surface
stable ground (compaction) amount of scale
wet and dry
working over old underground workings and voids
Contaminants may include:
animal carcasses (sheep, cows, kangaroos)
cigarette butts
consumables
ear plugs
metal bucket teeth
metal or steel rods
old fencing
old piping
plastic
timber
Indicators may include:
brake air pressure
brake oil temperature
computer indicators
engine oil pressure
fuel filter
parking brake
retarder
service meter
speedometer/odometer
steering filters
tachometer
torque converter oil temperature
transmission filter
voltmeter
water temperature
Cleaning methods may include:
water
steam cleaning
degreasing
vacuum
forced air
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for operating roller/compactors
implementation of requirements, procedures and techniques for the safe, effective and efficient operation of roller/compactors
working with others to undertake and complete the operation of roller/compactor that meets all of the required outcomes
consistent timely operation of roller/compactors that safely, effectively and efficiently meets the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistently achieving the required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the roller/compactors operations
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for operating roller/compactors
implementation of requirements, procedures and techniques for the safe, effective and efficient operation of roller/compactors
working with others to undertake and complete the operation of roller/compactor that meets all of the required outcomes
consistent timely operation of roller/compactors that safely, effectively and efficiently meets the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistently achieving the required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the roller/compactors operations
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB319 | RIIMPO205A | Operate roller/compactor | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH403 | RIIMPO205D | Operate roller/compactor | Unit of competency |