Unit of competency Outline

Date retreived
22/07/2026 5:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain timber bridges

Maintain timber bridges

Unit of competency
National Code
RIICTB201E
State Code
OCX17
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to maintain timber bridges in civil construction, including locating defects or faults, preparing for rectification, and performing maintenance activities, including replacing decking and fencing. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to perform maintenance on timber bridge
  • 1.1 Obtain, interpret and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to perform maintenance on timber bridges
  • 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Perform maintenance
  • 2.1 Obtain and apply schedule of maintenance repairs according to job requirements
  • 2.2 Locate access devices in reach of the areas to be repaired and confirm safe operation
  • 2.3 Locate fault and prepare area for rectification according to job requirements
  • 2.4 Select resources according to job requirements
  • 2.5 Report other faults identified
  • 2.6 Complete bridge maintenance activities according to job requirements
3. Conduct clean-up activities
  • 3.1 Clear work area and dispose of or recycle materials according to site requirements
  • 3.2 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
  • 3.3 Complete records and reports according to job requirements
No information
No information
Replaces
State Code National Code Title Type
WH162 RIICTB201D Maintain timber bridges Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification
BGO5 LGA30120 Certificate III in Local Government Qualification