Unit of competency Outline

Date retreived
22/07/2026 9:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and use cores and fillers appropriate for product

Select and use cores and fillers appropriate for product

Unit of competency
National Code
MEM26009
State Code
OAT49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030305 - Materials Engineering
Original Release Date
24/01/2020
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to select and use appropriate cores and/or fillers. Where the selection of suitable reinforcing required unit MEM26007 Select and use reinforcing appropriate for product should also be selected.Where the selection of a suitable resin system is required unit MEM26008 Select and use resin systems appropriate for product should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1 Determine product requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Select and use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Determine requirements of core and/or filler from specifications, job sheets or work instructions and customer requests
  • 1.5 Select appropriate process to be used to fabricate product
2 Select most appropriate core and/or fillers for job
  • 2.1 Compile specification of required composite properties relevant to the core and/or filler
  • 2.2 Compare required properties with specifications of available cores and/or fillers
  • 2.3 Select most appropriate core and/or filler
3 Evaluate selected core and/or filler
  • 3.1 Fabricate a sample using the selected core and/or filler and nominated resin and reinforcing system
  • 3.2 Conduct/organise for relevant tests
  • 3.3 Evaluate test results against product requirements
  • 3.4 Review fabrication process and make any required changes to core, filler or process
4 Fabricate product
  • 4.1 Identify and control hazards
  • 4.2 Prepare selected core and/or filler, as required
  • 4.3 Lay core in correct direction, including directional properties, as appropriate
  • 4.4 Prepare nominated reinforcing, including cutting to size/shape, packaging into kits and ant pre-treatment, as required
  • 4.5 Lay reinforcing in correct direction including fibre orientation and fibre pre-forming, as appropriate
  • 4.6 Mix nominated resin system, as required
  • 4.7 Prepare and incorporate core and/or filler, as required
  • 4.8 Fabricate product using selected process and minimise waste
  • 4.9 Review product compared to requirements
  • 4.10 Review core and/or filler selection and fabrication process
  • 4.11 Identify areas for improvement and take appropriate actions
  • 4.12 Complete any required documentation/reporting according to SOPs
No information
No information
Replaces
State Code National Code Title Type
WC764 MEM26009A Select and use cores and fillers appropriate for product Unit of competency