Unit of competency Outline

Date retreived
22/07/2026 7:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce specialised relief printed product

Produce specialised relief printed product

Unit of competency
National Code
ICPPRN452
State Code
AUM73
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
80
Description
This unit describes the skills and knowledge required to produce a specialised relief printed product operating a platen, cylinder or rotary printing machine.It applies to individuals who use specialised knowledge to problem-solve and experiment to obtain optimal results and a quality product with minimum production problems or downtime.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain specialised relief printing process
  • 1.1 Relief polymer forme or plate cylinder condition is monitored, evaluated and adjusted to ensure quality of the specialised printed product meets the sample sheet standard
  • 1.2 Relief polymer impression surface condition is monitored, evaluated and adjusted to ensure quality of specialised printed product meets the sample sheet standard
  • 1.3 Relief polymer inking system is monitored, evaluated and adjusted to ensure quality of specialised printed product meets the sample sheet standard
  • 1.4 Drying systems are monitored, evaluated and adjusted to ensure quality of specialised printed product meets the approved proof standard
2. Maintain production process
  • 2.1 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 2.2 If required, in-line printing/converting/binding/finishing processes are monitored and adjusted to ensure quality of product meets the approved proof standard
  • 2.3 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 2.4 Manual and/or automatic control is used as required according to job specifications
  • 2.5 Performance is monitored and verified using the process control system according to enterprise procedures
  • 2.6 Ink performance, colour, register and position of print are monitored and adjusted throughout production run
  • 2.7 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 2.8 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 2.9 Waste is sorted according to enterprise procedures
3. Tune and adjust machinery
  • 3.1 Idiosyncrasies of machines are reviewed and adjustments or tuning undertaken to compensate, or to exploit the idiosyncrasy, within manufacturer’s specifications
  • 3.2 Options are assessed to determine most effective/efficient method of production, ensuring highest quality and yield from machinery
  • 3.3 Test run confirms correct options and settings, or need for further adjustment or tuning to meet quality standards
  • 3.4 Options and recommendations are documented for future reference according to enterprise procedures
  • 3.5 Instruction on new practices is provided to machine operator or finisher, if required
4. Troubleshoot machinery and material problems
  • 4.1 Corrective or preventive action is recommended and implemented where appropriate
  • 4.2 Changes are communicated to relevant personnel in a logical and easily understood manner
  • 4.3 Changes are monitored to confirm improvement to production efficiency
  • 4.4 Ongoing problems are reported according to enterprise procedures
5. Conduct shutdown of production process
  • 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • 5.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements
  • 5.3 Unused ink is correctly labelled and stored according to manufacturer’s/supplier’s specifications and enterprise procedures
  • 5.4 Solid and liquid waste is removed from operating area, and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 5.5 All product is removed from operating area
  • 5.6 Machine faults requiring repair are identified and reported, according to enterprise procedures
  • 5.7 Repair/adjustment is verified prior to resumption of operations
No information
No information
Replaces
State Code National Code Title Type
D3199 ICPPR452C Produce specialised relief printed product Unit of competency