Unit of competency Outline

Date retreived
22/07/2026 12:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply and install sealant and sealant devices

Apply and install sealant and sealant devices

Unit of competency
National Code
CPCCSH2003
State Code
OCP75
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040311 - Carpentry And Joinery
Original Release Date
01/06/2021
Nominal Hours
4
Description
This unit of competency specifies the skills and knowledge required to apply sealants and sealant devices to structures. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to apply and install sealant and sealant devices.
  • 1.2 Plan all work to comply with laws and regulations, national construction codes, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications and safety data sheets (SDS), workplace requirements, drawings and specifications.
  • 1.3 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.4 Select tools and equipment, check for serviceability and report any faults.
  • 1.5 Calculate sealant material quantities to meet work instructions.
  • 1.6 Identify, obtain and prepare required materials and safely locate them ready for use.
2 Prepare surface to receive sealants.
  • 2.1 Clean surface free of contaminants in accordance with manufacturer instructions.
  • 2.2 Prepare surface by sanding or cleaning in accordance with manufacturer specifications.
3 Apply sealant.
  • 3.1 Apply sealant materials in accordance with manufacturer specifications.
  • 3.2 Check to ensure no air has been trapped within applied sealant and rectify as required.
  • 3.3 Align surfaces and install fixings in accordance with manufacturer specifications.
4 Install sealant devices.
  • 4.1 Fit sealant devices securely to specified positions.
  • 4.2 Secure installation of fixture and check to ensure level and plumb to line.
5 Clean up.
  • 5.1 Remove excess sealant from joints and surrounding surfaces and securely seal cartridge nozzle or container.
  • 5.2 Promptly remove sealants from tools and equipment.
  • 5.3 Clean up work site, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 5.4 Check, maintain and store tools and equipment and report any faults.
No information
No information
Replaces
State Code National Code Title Type
W9514 CPCCSH2003A Apply and install sealant and sealant devices Unit of competency
State Code National Code Title Type
BGC8 CPC20220 Certificate II in Construction Pathways Qualification
BGD6 CPC31920 Certificate III in Joinery Qualification