Unit of competency Outline

Date retreived
22/07/2026 2:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Bunch and strand wire

Bunch and strand wire

Unit of competency
National Code
PMBPROD302E
State Code
ODA81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
26
Description
This unit covers the skills and knowledge required to operate wire bunching and stranding equipment.This unit applies to an individual working alone or as part of a team.The unit principally refers to the practical, theoretical and technical knowledge and well-developed skills required in situations that require some discretion and judgement. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
  • 1.1 Identify materials required from job specifications
  • 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify and check emergency stops, guards and controls
  • 1.5 Identify checks and testing processes required for materials, quality, production management and equipment to meet job requirements
  • 1.6 Identify housekeeping needs and waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Verify equipment requirements against work requirements
  • 2.2 Set production process according to equipment specifications and work requirements, and adjust process to optimise output based on selected materials
  • 2.3 Select appropriate dies (number and sizes) and arrange in correct production sequence
  • 2.4 Check wire bunching and stranding equipment settings and adjustments, including tension, die number, sizes and threading arrangements against job specifications
  • 2.5 Verify materials are correct against job specifications
  • 2.6 Set up date, batch and materials markings according to workplace procedures
  • 2.7 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Operate and adjust wire bunching and stranding process
  • 3.1 Set up wire bunching and stranding equipment to support production requirements
  • 3.2 Check and load materials according to equipment instructions
  • 3.3 Start up equipment and operate process, and make adjustments to settings to meet job specifications
  • 3.4 Ensure process is operating according to equipment specifications and workplace procedures
  • 3.5 Follow checking and testing processes to assess if output meets job specifications and quality standards, and apply strategies for managing nonconforming outputs
  • 3.6 Maintain continuity of process to support production
  • 3.7 Accurately complete logs and records
  • 3.8 Apply waste management strategies according to workplace procedures
  • 3.9 Clean, adjust and lubricate equipment according to equipment instructions
  • 3.10 Pause or stop equipment in normal and abnormal circumstances according to workplace procedures
4. Shut down equipment
  • 4.1 Shut down equipment according to equipment instructions and workplace procedures
  • 4.2 Complete equipment cleanup and post-production adjustments according to equipment instructions and workplace procedures
  • 4.3 Put guards, locks and notices in place to prevent inadvertent startup
  • 4.4 Accurately complete workplace shutdown documentation
5. Anticipate and solve process control variances
  • 5.1 Recognise existing or potential process control variances and their causes
  • 5.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 5.3 Monitor process control variances and corrective actions taken until resolved
  • 5.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI81 PMBPROD302 Bunch and strand wire Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification