Unit of competency Outline

Date retreived
22/07/2026 10:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and manufacture or repair vehicle head lining

Remove and manufacture or repair vehicle head lining

Unit of competency
National Code
AURVTT010
State Code
AWZ12
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
44
Description
This unit describes the performance outcomes required to remove and manufacture or repair a vehicle head lining. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, manufacturing or repairing a vehicle head lining, replacing it according to manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications and workplace procedures are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work is planned to minimise waste and use time efficiently
2. Remove head lining
  • 2.1 Fittings are removed in preparation for removing head lining
  • 2.2 Head lining is removed using vehicle manufacturer recommended tools, equipment and procedures
  • 2.3 Activities are completed according to safety and environmental requirements and without causing damage to vehicle or components
3. Manufacture or repair head lining
  • 3.1 Materials are selected according to workplace instructions and customer requirements
  • 3.2 Manufacturing, repair and attachment methods are identified
  • 3.3 Templates are produced from workplace instructions or head lining sample
  • 3.4 Materials are measured, marked and cut according to workplace instructions
  • 3.5 Head lining is manufactured or repaired according to workplace procedures and safety and environmental requirements
4. Replace head lining
  • 4.1 Head lining is replaced using vehicle manufacturer recommended tools, equipment and procedures
  • 4.2 Fittings are replaced after installing head lining according to safety and environmental requirements and without causing damage to vehicle or components
5. Complete work processes
  • 5.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 5.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF562 AURVTT3010 Remove and replace vehicle head lining Unit of competency