Unit of competency Outline

Date retreived
22/07/2026 12:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Handle and store road marking materials

Handle and store road marking materials

Unit of competency
National Code
RIICRM202A
State Code
WB422
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2011
State Implementation and Classification
Approved Date
20/01/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/01/2010
Nominal Hours
8
Description
This unit covers the handling and storage of road marking materials in the civil construction industry. It includes planning and preparing, manually handling road marking materials, mechanically handling materials, handling and removing waste safely, and cleaning up. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1. Access, interpret and apply compliance documentation relevant to the work activity
  • 1.2. Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task
  • 1.3. Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults
  • 1.4. Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted task
2. Manually handle road marking materials
  • 2.1. Identify, select and sort road marking materials for particular tasks to manufacturer's recommendations and/or supervisor's instructions/specifications
  • 2.2. Identify handling characteristics of materials and apply appropriate handling techniques
  • 2.3. Apply specific handling requirement for hazardous materials according to materials safety data sheets (MSDS) and regulatory requirements
  • 2.4. Place materials protectively, clear of traffic ways, so that they are easily identified, retrieved and not damaged
  • 2.5. Erect signage and barricades where applicable, to isolate stored materials from workplace traffic or public access
3. Mechanically handle materials
  • 3.1. Prepare materials for mechanical handling in accordance with type of material and plant/equipment to be used
  • 3.2. Conduct loading, unloading, moving, locating and/or installing of materials in accordance to job requirements
  • 3.3. Mechanically handle materials safely according to manufacturer's recommendations
4. Handle and remove waste safely
  • 4.1. Handle waste materials correctly and safely according to materials safety data sheets (MSDS) and requirements of regulatory authorities
  • 4.2. Identify hazardous material for separate handling
  • 4.3. Dispose of non-toxic materials using correct procedures
5. Clean up
  • 5.1. Clear work area and dispose of or recycle materials in accordance with project environmental management plan
  • 5.2. Stack, stock pile or store unused materials safely
  • 5.3. Clean, check, maintain and store plant, tools and equipment
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant compliance documentation may include:
legislative, organisational and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Safety requirements may include:
OHS requirements in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan, including protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances
safe parking practices including ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance are kept from excavations, and areas secured from unauthorised access or movement
safe operating procedures including recognising and preventing hazards associated with uneven/unstable terrain, trees, pits, poles, trip hazards, dirt mounds, overhead service lines, bridges, surrounding buildings, obstructions, structures, facilities, dangerous materials, recently filled trenches, other machines, personnel, traffic control, working in proximity to others, worksite visitors and the public
recognising hazards and risks including uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials
emergency procedures related to equipment operation including emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation
Site locations may include:
on site storage facilities
depot storage facilities
Tools and equipment may include:
pallet trolley
materials hoist
forklift
vehicle mounted crane
Environmental protection requirements may include:
organisational/project environmental management plan
waste management
water quality protection
noise
vibration
dust and clean-up management
Materials may include:
paints
solvent
long life products (two pack epoxy, thermo plastic)
glass beads
skid resistant additives

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for handling and storing road marking materials
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of handling and storing road marking materials
working with others to undertake and complete the handling and storing of road marking materials that meets all of the required outcomes
consistent timely completion of handling and storing of road marking materials that safely, effectively and efficiently meets the required outcomes
safe storage procedures for a combination of any two of paint, solvent, glass beads, epoxy, additives and thermo-plastic on two projects in accordance with MSDS requirements
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistent achievement of required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the handling and storing of road marking materials
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

Replaces
State Code National Code Title Type
W2115 BCCRM2002B Handle and store road marking materials Unit of competency
Replaced By
State Code National Code Title Type
WH147 RIICRM202D Handle and store road marking materials Unit of competency
State Code National Code Title Type
W679 RII31509 Certificate III in Road Marking Qualification