Unit of competency Outline

Date retreived
22/07/2026 11:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design stand-alone renewable energy (RE) systems

Design stand-alone renewable energy (RE) systems

Unit of competency
National Code
UEERE0031
State Code
OCA84
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to design stand-alone renewable energy (RE) systems and its installation.It includes determining and developing stand-alone RE systems design, following design briefs, documenting design calculations and criteria, and obtaining design approval for stand-alone RE system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine stand-alone RE system
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 Scope of the stand-alone RE system and electrical installation is determined from design brief
  • 1.3 Safety and regulatory requirements to which the electrical installation must comply are identified, obtained and applied
  • 1.4 Design development work is planned to meet scheduled timelines in consultation with relevant person/s involved in the stand-alone RE system installation or associated work
2 Develop stand-alone RE system design
  • 2.1 Stand-alone RE system performance requirements and compliance methods are applied to the design
  • 2.2 Alternative stand-alone RE system designs are considered in accordance with the design brief
  • 2.3 Safety, functionality and budgetary considerations are incorporated in the stand-alone RE design
  • 2.4 Stand-alone RE system design is drafted and checked for compliance with the design brief and regulatory requirements
  • 2.5 Stand-alone RE system design is documented for submission to relevant person/s for acceptance and approval
  • 2.6 Unplanned situations are dealt with safely and effectively in accordance with workplace procedures
3 Obtain design approval for stand-alone RE system
  • 3.1 Stand-alone RE system design is presented for approval and any issues clarified with client representative and/or relevant person/s
  • 3.2 Requests for alterations to the design are negotiated with relevant person/s within the constraints of workplace policies
  • 3.3 Final design is documented and approval obtained from relevant person/s
  • 3.4 Quality of work is monitored in accordance with relevant performance agreement and/or workplace procedures or industry standards
No information
No information
Replaces
State Code National Code Title Type
WC709 UEENEEK139A Design stand-alone renewable energy (RE) systems Unit of competency
Replaced By
State Code National Code Title Type
OEW00 UEERE0063 Design off-grid photovoltaic/generating set systems Unit of competency