Unit of competency Outline
Date retreived
23/07/2026 10:05 PM AWST
23/07/2026 10:05 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out servicing operations
Carry out servicing operations
Unit of competency
National Code
AURTTA004
AURTTA004
State Code
AXB11
AXB11
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to carry out servicing operations. It involves preparing for the task, identifying lubricant requirements, servicing and adjusting vehicle and machinery, reporting the inspection findings, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The servicing operations include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to conduct servicing operations
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Servicing procedures and information are sourced and interpreted
- 1.3 Hazards associated with the work are identified and risks are managed
- 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Identify lubricants and fluid leakage
- 2.1 Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures
- 2.2 Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
- 2.3 Fluid leakages and component faults are identified and reported according to workplace procedures as required
3. Carry out servicing activities
- 3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
- 3.2 Post-service testing is carried out according to workplace procedures
4 Complete work processes
- 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 4.3 Tools and equipment are checked and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF372 | AURTTA2004 | Carry out servicing operations | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCJ39 | AURTTA104 | Carry out servicing operations | Unit of competency |