Unit of competency Outline

Date retreived
22/07/2026 6:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct laboratory-based acceptance tests for construction materials

Conduct laboratory-based acceptance tests for construction materials

Unit of competency
National Code
MSL973010
State Code
AWO17
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
45
Description
This unit of competency covers the ability to conduct laboratory tests to confirm the acceptability of raw and/or manufactured construction materials. Personnel will have access to established test methods, workplace procedures and readily available advice. They are expected to obtain reliable test results safely and efficiently. In general, these personnel do not calibrate equipment and make only limited adjustments to the controls. The unit of competency does not cover interpretation or analysis of results or troubleshooting equipment problems.This unit of competency is applicable to laboratory personnel working in the geotechnical and construction material testing industry sectors who conduct control and compliance tests in consulting laboratories or laboratories at extractive, manufacturing or construction sites using established test methods. These tests could involve aggregates, concrete, soils, road pavement or other specialised construction materials and products.The unit of competency could also be relevant to laboratory technicians working in the water/wastewater and trade waste industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Prepare for laboratory-based acceptance tests
  • 1.1 Access relevant job instructions from laboratory information management system (LIMS)
  • 1.2 Interpret test request to confirm samples to be tested, the test method and equipment involved
  • 1.3 Identify hazards and workplace controls associated with the sample, preparation methods, reagents and/or equipment
  • 1.4 Assemble all required equipment and materials
  • 1.5 Plan work sequences for optimum efficiency and/or throughput of multiple samples
2 Prepare samples or test pieces
  • 2.1 Retrieve samples and/or test pieces from storage and record their general appearance
  • 2.2 Check the accuracy and completeness of accompanying labels and documentation to ensure traceability
  • 2.3 Check that the storage/curing conditions of samples and/or test pieces were appropriate
  • 2.4 Compare samples and/or test pieces with test specifications, record observations and report discrepancies
  • 2.5 Prepare samples and/or test pieces in accordance with appropriate test method
3 Check test equipment before use
  • 3.1 Set up equipment in accordance with test method
  • 3.2 Perform pre-use and safety checks in accordance with workplace procedures
  • 3.3 Identify faulty or unsafe equipment and report to appropriate personnel
  • 3.4 Check calibration status of instruments and report any out-of-calibration items to appropriate personnel
4 Perform laboratory tests
  • 4.1 Conduct tests in accordance with test method and workplace procedures
  • 4.2 Record data and observations in accordance with workplace procedures
  • 4.3 Recognise obvious errors or atypical data and take appropriate corrective actions
  • 4.4 Perform calculations as set out in test method
  • 4.5 Compare calculated results with expected values and report atypical results promptly to appropriate personnel
  • 4.6 Complete technical/administrative records and test reports in accordance with workplace procedures
  • 4.7 Seek advice to deal with any situation beyond own technical competence
5 Maintain a safe work environment
  • 5.1 Use safe work procedures and personal protective equipment (PPE) to ensure personal safety and that of others
  • 5.2 Minimise generation of waste and environmental impacts of testing
  • 5.3 Collect and/or dispose of all waste in accordance with environmental/quarantine requirements and workplace procedures
  • 5.4 Care for and store equipment, used test pieces and back-up samples in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WA714 MSL973010A Conduct laboratory-based acceptance tests for construction materials Unit of competency
Replaced By
State Code National Code Title Type
OAC92 MSL973022 Conduct laboratory-based acceptance tests for construction materials Unit of competency