Unit of competency Outline

Date retreived
23/07/2026 5:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Roll aggregate in sprayed sealing operations

Roll aggregate in sprayed sealing operations

Unit of competency
National Code
RIICBS205D
State Code
WH050
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
24
Description
This unit describes a participant’s skills and knowledge required to roll aggregate in sprayed sealing operations in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to roll aggregate in sprayed sealing operations
  • 1.1 Access, interpret and apply, roll aggregate in sprayed sealing operations, documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Confirm and apply environmental protection and safety requirements
  • 1.6 Obtain, interpret and implement traffic management signage requirements
  • 1.7 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Prepare equipment for rolling of aggregate
  • 2.1 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures
  • 2.2 Check and adjust tyre inflation pressure
3. Roll aggregate
  • 3.1 Drive and operate roller to required rolling patterns
  • 3.2 Monitor quality of surface and report faults
  • 3.3 Maintain safe distance from other vehicles
  • 3.4 Control rolling speed to suit operations
  • 3.5 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 3.6 Complete work plan within the operating capacities of the allocated equipment
4. Clean up
  • 4.1 Clear work area and dispose of or recycle materials
  • 4.2 Clean, check, maintain and store plant, tools and equipment
  • 4.3 Carry out housekeeping requirements
No information
No information
Replaces
State Code National Code Title Type
WB016 RIICBS205A Roll aggregate in sprayed sealing operations Unit of competency
Replaced By
State Code National Code Title Type
OBM94 RIICBS315 Roll aggregate in sprayed sealing operations Unit of competency