Unit of competency Outline

Date retreived
22/07/2026 6:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace a recreational vehicle roof

Remove and replace a recreational vehicle roof

Unit of competency
National Code
MSMRV350
State Code
AWC05
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
04/05/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to remove and replace the fixed roof of a recreational vehicle. The same roof may be replaced, or the removed roof may be replaced with a different roof. The work will be carried out in a recreational vehicle service and repair facility.This unit of competency covers the preparation for, removal of, replacement of, and clean-up after the removal and replacement of a roof.The operator will be required to work to procedures, and follow plans/specifications, insurance requirements and customer needs. This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work, including insurance requirements and customer needs
  • 1.2 Examine roof and determine what needs to be done and how to do it
  • 1.3 Check required tools and jigs are available at the worksite
  • 1.4 Check required materials and components are available at the worksite
  • 1.5 Identify any hazards and the related hazard controls
  • 1.6 Check the hazard controls are in place and operational
  • 1.7 Query any items which are different to usual and clarify requirements
2 Remove roof/skin in accordance with devised procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Remove roof/skin maximising the potential for reuse
  • 2.3 Segregate and handle waste in accordance with procedures
  • 2.4 Temporarily store roof/skin and components which are to be reused
3 Refurbish roof frame as required
  • 3.1 Use relevant hazard controls, including PPE
  • 3.2 Examine exposed roof frame
  • 3.3 Identify any additional damage revealed and decide how it can be made good
  • 3.4 Negotiate with customer over any changes in job scope and cost
  • 3.5 Make good/replace roof frame as required
  • 3.6 Ensure roof frame is fixed to wall/frame as appropriate
4 Replace roof/skin in accordance with devised procedures
  • 4.1 Use relevant hazard controls, including PPE
  • 4.2 Replace roof/skin in accordance with the devised procedure
  • 4.3 Trim as required
  • 4.4 Ensure roof/skin is attached as required
  • 4.5 Ensure roof seals as required
5 Finish removal and replacement of roof
  • 5.1 Check roof has been refitted correctly and make any required adjustments
  • 5.2 Clean up recreational vehicle and make ready for hand back to customer
  • 5.3 Clean up work area, leaving it ready for the next job
  • 5.4 Segregate and handle waste in accordance with procedures
  • 5.5 Complete any required documentation/records
No information
No information
Replaced By
State Code National Code Title Type
OFD46 MSMRV383 Repair recreational vehicle windows, doors and external items Unit of competency