Unit of competency Outline

Date retreived
22/07/2026 3:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake dam safety surveillance

Undertake dam safety surveillance

Unit of competency
National Code
UEPOPS328
State Code
OAH00
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/05/2019
Nominal Hours
27
Description
This unit involves the skills and knowledge required to conduct ongoing surveillance of water storage facilities to ensure structural integrity and water quality is maintained.Hydropowerrelies on water stored in dams to create electricity therefore, the structural integrity of dams is essential to the smooth operation of hydro power generation systems and plant. Competency in this unit requires the ability to plan and prepare for work, undertake dam safety surveillance, sample and record water quality and complete work. Individuals will, in general, work as an operator, in a power generation facility. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are identified, applied and monitored
  • 1.2 Work requirements are identified from work order and are confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
  • 1.3 Resources are obtained and inspected for compliance, in accordance with workplace procedures
  • 1.4 Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
  • 1.5 Work is sequenced and prioritised, in accordance with workplace procedures and site requirements
2 Conduct dam safety surveillance
  • 2.1 Surveillance of dam structures is conducted, in accordance with workplace procedures and guidelines
  • 2.2 Recordings of dam leakage are reported to appropriate personnel and external authorities, in accordance with workplace procedures and legislative requirements
  • 2.3 Special inspections are undertaken following abnormal dam events, in accordance with workplace procedures
3 Sample and record water quality
  • 3.1 Water samples are collected using appropriate equipment and techniques, in accordance with workplace procedures
  • 3.2 Water testing is performed using laboratory or field equipment, in accordance with workplace procedures
  • 3.3 Water test results are recorded and abnormal results are communicated to appropriate personnel, in accordance with workplace procedures
4 Complete work
  • 4.1 Documentation is updated, in accordance with workplace procedures
  • 4.2 Test equipment and tools are maintained and stored, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE351 UEPOPS328B Undertake dam safety surveillance Unit of competency
Replaced By
State Code National Code Title Type
ODX97 UEPOPS144 Undertake dam safety surveillance Unit of competency