Unit of competency Outline

Date retreived
22/07/2026 7:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and tag bicycle components

Remove and tag bicycle components

Unit of competency
National Code
AURB100064B
State Code
D7558
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
26/09/2011
Nominal Hours
12
Description
This unit of competency describes the skills and knowledge required to identify and remove a range of bicycle components and tag by title and application.It requires the ability to understand specifications and use tools and equipment to remove and tag components.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and tag bicycle components
  • 1.1. Identify and confirm the nature and scope of work requirements
  • 1.2. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
  • 1.3. Source equipment and information, such as workshop manuals, specifications and tooling
  • 1.4. Analyse method options and select those most appropriate to the circumstances
  • 1.5. Identify and remove/minimise risks associated with removal and tagging of bicycle components
2. Remove bicycle components
  • 2.1. Identify bicycle components for removal
  • 2.2. Implement methods for the safe removal and tagging of components in accordance with manufacturer/component supplier specifications
  • 2.3. Select and use appropriate tools and equipment
  • 2.4. Remove components without damage
  • 2.5. Inspect removed components
  • 2.6. Report on component condition in accordance with standard procedures
3. Tag bicycle components
  • 3.1. Confirm tagging procedures
  • 3.2. Identify resource requirements for tagging and prepare support equipment
  • 3.3. Tag components without damage
  • 3.4. Remove waste following standard procedures
  • 3.5. Clean work area and store tools and equipment in accordance with standard procedures
No information
No information
Replaces
State Code National Code Title Type
W2801 AURB100064A Remove and tag bicycle components Unit of competency
Replaced By
State Code National Code Title Type
WF041 AURBTA1001 Remove and tag bicycle components Unit of competency
No information