Unit of competency Outline

Date retreived
22/07/2026 7:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use waterproofing tools and equipment

Use waterproofing tools and equipment

Unit of competency
National Code
CPCCWP2002
State Code
OCP04
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to safely and effectively use tools and equipment in waterproofing, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.The unit is suitable for those with basic skills and knowledge undertaking routine waterproofing tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to use waterproofing tools and equipment.
  • 1.1 Read and interpret task instructions to use tools and equipment.
  • 1.2 Select and use personal protective equipment (PPE) as required for each stage of the task.
  • 1.3 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.4 Follow requirements of job safety analyses and safety data sheets.
  • 1.5 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
2 Select hand and power tools and equipment.
  • 2.1 Select tools and equipment consistent with hazard minimisation and the requirements of the task.
  • 2.2 Review manufacturers’ recommendations for operating and using tools and equipment.
  • 2.3 Check tools and equipment for correct function and report any faults.
  • 2.4 Check power leads for current tags and for safety and serviceability, and report any faults.
  • 2.5 Check and maintain power tool guards following manufacturers’ recommendations.
  • 2.6 Follow WHS requirements for using tools and equipment.
  • 2.7 Complete pre-operational checks, including checking lubricants and water.
3 Use tools and equipment and clean up.
  • 3.1 Connect safe power supply to work area.
  • 3.2 Undertake start-up and shut-down processes following manufacturers’ recommendations.
  • 3.3 Use tools and equipment safely and effectively in accordance with manufacturers’ recommendations and workplace requirements.
  • 3.4 Switch off tools and equipment and locate safely when not in immediate use.
  • 3.5 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations and standard work practices.
No information
No information
Replaces
State Code National Code Title Type
W9619 CPCCWP2002A Use waterproofing tools and equipment Unit of competency