Unit of competency Outline

Date retreived
22/07/2026 10:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dry material

Dry material

Unit of competency
National Code
FWPWPP3212
State Code
AXJ29
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/10/2016
Nominal Hours
25
Description
This unit of competency describes the outcomes required to dry materials in a continuous operating single or multi pass dryer or flash dryer using either steam, heated air or gas.The unit applies to production operators and technicians who dry material in a forest and wood products factory setting and includes operator maintenance.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for drying
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Identify and obtain type and quantity of material for drying process.
  • 1.3 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.4 Plan drying process in line with work order.
2. Set up and operate equipment for drying material
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre start-up equipment checks to ensure operational effectiveness, light furnace and monitor continually.
  • 2.3 Follow emergency shutdown procedures in response to fire.
  • 2.4 Set drying temperature, humidity and feed rate for optimal product recovery.
  • 2.5 Position material and feed at rate appropriate to machine speed, capacity, treatment being dried, thickness and condition.
  • 2.6 Assess material visually and measure moisture levels, ensuring outcomes in line with work order.
  • 2.7 Coordinate out-feed to ensure efficient recovery of dried material.
  • 2.8 Record and report on drying process to appropriate personnel.
3. Redistribute material
  • 3.1 Regrade material in line with industry standards.
  • 3.2 Direct material to storage or processing operations in line with organisational procedures.
  • 3.3 Reject and dispose of defective material in line with environmental protection practices.
  • 3.4 Clean work area in line with organisational safety procedures.
4. Complete operator maintenance
  • 4.1 Follow organisational safety procedures to lock out equipment.
  • 4.2 Check drying mechanisms for effective condition.
  • 4.3 Check, and maintain oil levels, air filters, conveyors and chains in line with manufacturer’s recommendations.
  • 4.4 Keep machine clear of dust and debris in line with organisational safety procedures.
  • 4.5 Record and report equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6127 FPIWPP3212B Dry material Unit of competency
Replaced By
State Code National Code Title Type
OFC89 FWPSAW3257 Operate timber drying kiln Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification